Salt spray test chamber | neutral salt spray test machine | aging salt spray test machine | oxide salt box

Salt spray test chamber | neutral salt spray test machine | aging salt spray test machine | oxide salt box

Product description:

Product parameters:

  • Brand: SFMIT
  • Model: MIT-60SF
  • Product Number: MIT-60SF
  • Color Classification: 600 × 450 × 400 (general section) 900 × 600 × 500 (general section) 1200 × 1000 × 500 (general section) 600 × 450 × 400 (Enhanced) 900 × 600 × 500 (Enhanced) 1200 × 1000 × 500 (enhanced) copper accelerated acetic acid salt spray test (CASS) reagent sodium chloride (Nacl) 5 kg / box 600 × 450 × 400 (enhanced) 900 × 600 × 500 (enhanced)
  • Renovation and construction content: the main material procurement

Salt spray test machine functions:

Salt spray test is a salt spray test machine Artificial salt spray conditions to assess the corrosion resistance of a product or environmental testing of metallic materials can pass. It mainly has two categories, one for the natural environment exposure test, and the other is artificial accelerated salt spray environmental testing artificial salt spray test is conducted using test equipment having a certain volume of space - salt spray test machine, the volume of space in its use artificial means, resulting in salt spray environment of the product salt spray corrosion resistance quality assessment. it is compared with the natural environment, the concentration of chloride salt spray environment, which can be several times or several times the natural environment in general content of salt spray, corrosion rate greatly improved, product salt spray test, the outcome was also significantly reduced. exposure in the natural environment as a product sample test, corrosion may have to wait until a year, while in artificial salt spray test conditions in twenty four hours, you can get similar results.

● Device Test environment requirements:

◆ temperature: In order to play a stable laboratory functionality, performance, should choose the annual temperature 5 ℃ ~ 35 ℃ place

◆ Relative Humidity: 85% RH
◆ atmospheric pressure: 86 ~ 106kPa
◆ around without strong vibration
◆ No direct sunlight or other heat sources direct radiation
◆ around without a strong airflow when the ambient air for an intense flow, air flow should not be blowing directly on the box
◆ strong electromagnetic influence around
◆ around without high concentrations of dust and corrosive substances
● meet the standards
Applicable international standards: RELATEU STANDARDS CNS 3627, 3885, 4159, 7669, 8866; JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO3768, 3769, 3770; ASTM B-117, ASTM B-268 B-268, GB-T2423, GJB150, 3770;
◆ in line with GB / T 2423.17-1993 salt spray test ◆ in line with GB / T 2423.18-2000 salt spray test
◆ in line with GB / T 10125-1997 salt spray test ◆ meet IEC68-2-52 1996 salt spray test
◆ meet ASTM.B117-97 salt spray test ◆ meet GB.10587-89 salt spray test
◆ meet IEC68-2-11 salt spray test ◆ meet JIS H8502 salt spray test
◆ meet CNS.4158 salt spray test ◆ meet CNS.4159 CASS accelerated copper acetate salt spray test
◆ meet the test requirements of the military standard of GJB-150 ◆ meet Test requirements of GB 6458-86
◆ in line with GB / T 12967.3-91 CASS copper accelerated acetic acid salt spray test ◆ in line with GB / T 1771-2007 Paints and varnishes resistance to neutral salt spray test
Product Features:
Salt spray corrosion test, also known as salt spray test machine, salt fog spray test machine can simulate atmospheric salt salt spray tiny droplets dispersed environment posed by the devices, are widely used in electronic, electrical and automotive, aerospace , mobile communications, motorcycles, plastics, machinery parts, electronic components, metal surface, in whole or in salt spray corrosion test of the protective layer. the device is heated by the chamber body, a chamber body, humidification system, saturation systems, electrical control systems, aspiration systems, protection systems and other components.
Virtual Gallery:


Spray method: A: Continuous salt spray test machine B: Programmable salt spray test machine.

With full detection system failure occurs can be lit display.

· Whole imported PVC board system, the structure is strong, never deformation, acid and high temperature and never aging.

* Automatic / manual water system with automatic / manual water feature low water level, testing is not interrupted, water shortage warning display.

· Precision glass nozzle mist spread evenly, and naturally fall on the specimen, to ensure that no crystalline salt obstruction.

· Controller are on the same board, simple, and clear.

· North Korea with dual temperature protection, water shortage alert, ensure safe use.

· Imported temperature controller with manual and automatic control mode, use digital display, PID control, error ± 0.1 ℃, the maximum time set up 999HrS.

· Laboratory using direct steam heating method, heating up fast and evenly, shorten the standby time.

· Spray tower with conical diffuser, a guide fog, adjust the volume and even off the fog and other functions.

Pressure tank with Henry's law, be heated humidification, and provide the required laboratory humidity.

* Plus test tank cover to the mainframe kinds of pneumatic cylinder automatic mode switch, easy operation and good security.

• After the test is completed, with automatic defogging device can clearly observe the interior of the test sample.

First, the specification:

Model: MIT-60 MIT-90 MIT-120

Test chamber volume (L): 110, 300, 600

The size (W × D × H): 600 × 450 × 400, 900 × 600 × 500, 1200 × 1000 × 500

Outer dimensions (W × D × H): 1070 × 600 × 1180, 1410 × 800 × 1280, 1350 × 1150 × 1615

Power supply: single phase 220V 2KW 50H

Second, the machine Material:

a. Test box body made of light gray impact resistant PVC plate, thickness 5mm, durable and temperature at 85 ℃. (Taiwan, South Asia licensing). edge surround strengthen thickness 10mm, solid structure.

b. test chamber lid sealed with PVC impact resistance plate, thickness 5mm, high temperature deformation is not distorted. double thick edge inside and outside, to prevent long-term high temperature deformation produced distorted thickness 15mm

c. Hide integrated reagent bottle supplement, easy to clean, easy to break, easy to operate.

d. saturated air barrels SUS # 304 stainless steel high pressure barrel insulation best (Taiwan and Taiwan Exhibition Electric)

e. Place the sample temperature station uses 8mm plate made of ABS, load-bearing ability, the test sample holder planar indexing formula, arbitrarily adjust the angle, surrounded by fog off the uniform, consistent by fog, the test results are accurate, the number of test samples were placed more. (can be customized according to customer product requirements)

Third, the technical basis:

In accordance with JIS, ASTM, CNS, GB standard parameter setting operation

A salt spray test: NSS, ACSS

1 Laboratory: ............... 35 ℃ ± 1 ℃ fluctuation: ≤ ± 0.5 ℃ uniformity: ≤2 ℃

2 saturated air barrel: ......... 47 ℃ ± 1 ℃

B corrosion test: CASS

1 Laboratory: ............... 50 ℃ ± 1 ℃ fluctuation: ≤ ± 0.5 ℃ uniformity: ≤2 ℃

2 saturated air barrel: ......... 63 ℃ ± 1 ℃

Fourth, the air supply system: air pressure of 1kg / cm2 points two-stage adjustment

First adjustment of 2kg / cm2 import type air filter together with drainage function;

Second adjustment of 1kg / cm2 pressure.

Five spray method:

1. Using Bo Nute principle draw brine and then atomized, uniform atomization, no blocking phenomenon of crystallization, continuous testing to ensure the standard of

2. Nozzle: made of special glass nozzle, adjustable spray volume size and the ejection angle

3. The amount of spray 1 ~ 2ml / h adjustable (ml / 80cm2 / h standard test 16 hours averaging volume) metering tube using the embedded installation, neat appearance, easy to observe, reducing equipment installation space

4. Spray method: continuous spray

5. The direct heating method, heating speed reduction standby time, when the temperature reaches ON.OFF switch, temperature accuracy, less power consumption.

(Heating pipe made of high corrosion resistance heating system: titanium tubing).

Sixth, the control system:

1. Test chamber temperature controller 0-99.9 ℃, dual digital LCD display without having P.I.D automatic calculation, control error ± 0.3 ℃ (YANGMING) Taiwan 1

2. Pressure air barrel temperature control 0-99.9 ℃, dual digital LCD display without having P.I.D automatic calculation, control error ± 0.3 ℃ (YANGMING) Taiwan 1

3. laboratory heating liquid expansion tank safety temperature control 1-120 ℃ (Italy) 1

4. The pressure of air safety barrels of liquid expansion temperature control 1-120 ℃ (Italy) 1

5. The digital display time control 0.1S-9999hr (Taiwan ANLY) 1

6. When the product is 0-99999 hr (Italy) 1

7. relay (Omron OMRON) 5 Zhi

8. Spray the solenoid valve (imported KSD) 1 Zhi

9. demisting solenoid valve (imported KSD) 1 Zhi

10. Laboratory automatic water solenoid valve 1

11. The pressure tank automatic water solenoid valve 1

12. The Board Illuminated Push Button Switch, Push Button continuously 20,000 times a

13. The water system: automatic water replenishment system, a

14. salt fog seal tank: automatic adding water 1

7, security protection devices:

(A), low water level, automatically cut off power supply, safety warning lamp lighting device display.

(B) over-temperature, automatically cut off the heater power, safety warning lamp lighting device display.

(C) reagent (saline) water level is low, security warning light lit display and alarm device

(D) leakage protection, and prevent leakage or short circuit caused personal injury and equipment failure

Eight, the standard configuration

a. shelf ........................ 1 set (upper 0-type bar 6, the lower V-shaped frame 4)

b. a standard cylinder .....................

c. a collection cup ........................

d. a glass nozzle ..................... (regular cleaning)

e. brine filter .................. 1 (regular cleaning)

f spray tower ........................ 1 set

g. demisting system ..................... 1 group

Nine, random accessories

Reagent sodium chloride (Nacl) 500 grams of a 2 bottle hydrometer a PH test strips 1 package

Operating manual and warranty card 1

5L plastic measuring cup 1


Dedicated customer service center, with a full-time pre-sales technical engineers responsible for product, sales, after-sales service for users before ordering presentation and performance requirements of the product, to provide relevant information, a good user staff
The sale of equipment to ensure that the requirements set by the contract delivery date of delivery to your company, users will send a special professional and technical personnel on-site installation, commissioning, to the user satisfaction
The sale of equipment are in line with national standards, and to provide customers with complete equipment and technical information relevant technical training to help users and administrators training equipment operators to enable them to proper use and maintenance of equipment; the establishment of regular visits and maintenance of the system, regularly on the sale of product quality tracking and returning the user fault losses that may occur to minimize
The date of the sale of the device since the installation of the 13 months warranty period, the warranty period for free treatment of various hardware and software failures due to quality problems caused by the equipment itself; warranty period, according to customer needs to do service work on equipment accessories and consumables provided by priced deals
Within 24 hours to reply customers in the use of equipment problems, how to solve the major problems telephone communication, unified national customer service: 0519-85807199