Huawei AP5030DN-S-DC fat and thin one integrated dual-band wireless AP | wireless access point

Huawei AP5030DN-S-DC fat and thin one integrated dual-band wireless AP | wireless access point
 

Product description:

Product parameters:

  • Brand: Huawei / Huawei
  • Model: AP5030DN-S-DC
  • Network equipment type: wireless bridge


AP5030DN-S wireless access point

Broadband network terminal-AP5030DN-S-DC-11ac, dual-band, built-in antenna

AP5030DN-S is Huawei's affordable 802.11n / ac products, dual-band at the same time to provide business support 3 × 3MIMO, with complete business support, high reliability, high security, network deployment is simple, automatic on-line And configuration, real-time management and maintenance features to meet the network deployment requirements.

Suitable for deployment in the structure is relatively simple, relatively small area, the user is relatively centralized occasions and the demand for larger capacity areas, such as small and medium enterprises and enterprise branches, to provide basic 802.11n / ac wireless access network.

Product Features

WLAN features

  • Compatible with IEEE 802.11a / b / g / n / ac standards
  • The highest rate of 1.75Gbps
  • Support for Maximum Merge Ratio (MRC)
  • Support for cyclic delay / cyclic shift diversity (CDD / CSD)
  • Support beamforming (Beamforming)
  • Support for Maximum Likelihood Decoding (MLD)
  • Support for packet aggregation: A-MPDU (Tx / Rx), A-MSDU (Rx only)
  • Supports 802.11 Dynamic Frequency Selection (DFS)
  • Supports ShortGI in 20M, 40M and 80M modes
  • Priority-based data processing and forwarding based on WMM (Wi-Fi Multimedia) or Wi-Fi multimedia standard mapping and priority scheduling rules
  • Supports automatic and manual two rate adjustment mode, the default mode is automatic rate adjustment mode
  • Support for WLAN channel management and channel rate adjustment
  • Support channel automatic scanning function, automatically avoid interference
  • Support for each SSID in the AP can be configured to hide the function independently
  • Supports SST (signal sustain technology)
  • Support U-APSD power saving mode
  • Fit AP work mode supports CAPWAP (control and provisioning of wireless access points) that is, wireless access point control protocol tunnel data forwarding
  • Fit AP works in automatic AP mode
  • Fit AP supports WDS mode
  • Fit AP works in mesh mode and supports Mesh dual MPP networking
  • Hotspot2.0 is supported in Fit AP working mode
  • Fit AP work mode supports 802.11k, 802.11v protocol intelligent roaming

Network characteristics

  • Comply with IEEE 802.3u standard
  • Auto-negotiation and auto MDI / MDI-X for rate and duplex mode are supported
  • It supports VLAN division based on the SSID of user access
  • Support VLAN ID (1-4094), can set up 16 VAPs per radio frequency
  • The management channel of the AP on the AP can be tagged and untagged
  • Supports DHCP clients to obtain IP addresses through DHCP
  • Support the business data tunneling and direct forwarding in two ways
  • It supports the access isolation between different wireless terminals in the same VLAN
  • Support mDNS gateway protocol, which can realize service sharing among AirPlay and AirPrint among VLAN users.
  • Support for user access control (ACL)
  • LLDP link discovery is supported
  • Fit AP mode supports CAPWAP interrupt service hold in direct forwarding mode
  • Fit AP supports AC unified authentication
  • AC dual-link backup is supported in Fit AP working mode
  • Supports Soft GRE

QoS features

  • Priority-based data processing and forwarding based on WMM (Wi-Fi Multimedia) or Wi-Fi multimedia standard mapping and priority scheduling rules
  • Support WMM parameters by RF
  • Support WMM power saving mode
  • Priority mapping and downstream traffic mapping are supported
  • Supports queue mapping and scheduling
  • Supports bandwidth-based per-user limits
  • Supports adaptive bandwidth management, automatically adjusts user bandwidth allocation according to the number of users and environment, and improves the user experience.
  • Support Airtime scheduling

Security features

  • Support Open-System authentication
  • Support WEP authentication / encryption mode
  • Support WPA / WPA2-PSK authentication / encryption
  • Support WPA / WPA2-802.1X authentication / encryption mode
  • Support WAPI authentication / encryption mode
  • Support WIDS, including illegal AP and STA detection, attack detection, STA / AP black and white list function
  • Support for 802.11w protocol, the management of the frame encryption

Maintenance features

  • In the Fit AP working mode, centralized management and maintenance of APs through AC are supported
  • Fit AP work mode supports automatic AP on-line function, and automatically load the configuration, can be plug and play
  • FIT AP work mode supports WDS zero configuration deployment
  • Mesh zero configuration deployment is supported in Fit AP working mode
  • Support batch automatic upgrade
  • The AP supports two types of local management: Telnet and serial
  • The NMS supports real-time monitoring of user configuration information and fast fault location
  • Support AP system status alarm

BYOD

  • Supports device identification based on MAC OUI
  • Supports HTTP-based user information to identify device types
  • It supports DHCP-based device identification
  • Supports the RADIUS server to forward packets according to the device type carried in the RADIUS authentication / accounting packets.

Location Services

  • Support for AeroScout, Ekahau Tag positioning
  • Support for WiFi terminal positioning

Spectrum analysis

  • Identify 8 or more sources of interference, such as Bluetooth, microwave, cordless phone, Zigbee, Game Controller, 2.4G / 5G wireless audio and video, and baby monitor.
  • In conjunction with eSight, the location of the interference source and spectrum display

Product specifications

Basic parameters

project description
Physical parameters Dimensions (L × W × H) 220 mm × 220 mm × 53 mm
weight 1.0 kg
System memory

256MB DDR2

32 MB Flash
Power supply parameters power input

DC 12V ± 10%

PoE power supply: -48V DC, to meet 802.3af / at Ethernet power supply standards
Maximum power consumption

11.5W

Note: Actual maximum power dissipation varies by country and region.

Environmental parameters Operating temperature -10℃~ +50℃
storage temperature -40℃~ +70℃
Working humidity 5% to 95% (non-condensing)
Dustproof and waterproof grade IP41
altitude -60m ~ 5000m
Working pressure 70 kPa to 106 kPa

Radio frequency parameters

project description
Antenna type Built-in antenna
Antenna gain 2.4G: 4dBi. 5G: 5dBi
The maximum number of users ≤256
Maximum transmit power

20dBm

Note: Actual transmit power varies according to country and region regulations.

Power adjustment step 1 dBm
Receiver sensitivity 2.4 GHz 802.11b (CCK): -101 dBm @ 1 Mb / s; -91 dBm @ 11 Mb / s
2.4 GHz 802.11g (non-HT20): -92 dBm @ 6 Mb / s; -81 dBm @ 54 Mb / s
2.4 GHz 802.11n (HT20): -92 dBm @ MCS0; -77 dBm @ MCS7
2.4 GHz 802.11n (HT40): -90 dBm @ MCS0; -75 dBm @ MCS7
5 GHz 802.11a (non-HT20): -94 dBm @ 6 Mb / s; -79 dBm @ 54 Mb / s
5 GHz 802.11n (HT20): -93 dBm @ MCS0; -76 dBm @ MCS7
5 GHz 802.11n (HT40): -91 dBm @ MCS0; -74 dBm @ MCS7
5 GHz 802.11ac (VTH20): -93 dBm @ MCS0NSS1; -71 dBm @ MCS8NSS1
5 GHz 802.11ac (VTH40): -91 dBm @ MCS0NSS1; -67 dBm @ MCS9NSS1
5 GHz 802.11ac (VTH80): -89 dBm @ MCS0NSS1; -65 dBm @ MCS9NSS1