Eide Fort HLD | spiral rack, pushing Rally of test bed / shelf + Rally scale entrained

Eide Fort HLD | spiral rack, pushing Rally of test bed / shelf + Rally scale entrained

Product description:

Product parameters:

  • Brand: Ed Fort
  • Series: HLD
  • Model: HLD
  • Color Classification: Single HLD test bench (not including Rally ruler) within 50KG Digital Force Gauge + test machine set (including scale) 001 clamp one pair alone without the other within 50KG Digital Force Gauge + test machine set (without scale) scale price alone (excluding rack Rally) 100KG + built Rally test machine (without scale) within + 50KG pointer Rally test machine set (without scale) alone HLD test bench ( with a ruler without tension meter) 50KG the following pointer Rally NK 50KG the following digital Force gauge HP (FIG. 2) at a pressure jig jig 35MM 50MM

Guangdong Province and Jiangsu and Zhejiang Lu made express, all other provinces hair Nadu from mentioning, please consult!

Price above the purchase price as a separate, stand 950 yuan, (50KG less price), (50KG or less the same price) click here!

Made the following test jig pressure plus 150 yuan

35mm upper and lower50mm

In addition addend can significantly scale 240 yuan!

As shown in FIG rack with scale / renderings

Trapezoidal screw rotates, the side of the hand wheel load, the operation is simple and stable.

The base standard mobile platform, enabling around, move back and forth, convenient and accurate clamping.

Great stability good base machine, suitable for indoor table testing.

Optional NK / HP Series force gauge, a combination of various small fixture into a professional tester.
Technical Parameters:
Maximum load: 1000N;

Effective stroke: 180 mm;
Dimensions: 260 * 350 * 500mm
NW: 20Kgs.

Ed Fort Digital Force Gauge description and parameters:

Functions and features:
High Resolution, accuracy of 0.5, minimum reading of 0.001N;

Peak hold function to maintain peak display until manually cleared.;

Peak automatic discharge function, peak hold display is automatically released after 1-9 seconds;

N (Newton), kgf (kilogram), lbf (pound) three units to choose from, and mutual conversion;

Gravity setting function;

Compare function, free to set upper and lower limit deviation, red and green indicator light and buzzer sound and light alarm settings automatically;
Large memory storage function test values ​​stored --888;
Induction backlight open and close can be set freely;
LCD display can be flipped direction;
Environmental protection, energy saving and environmental protection of the machine design, power off time (10 to 90 minutes) is free to set;
You can set upper and lower limits and statistical analysis comparison value exceeds the comparison value buzzer alarm;
2 sets of dimensions to meet the domestic majority of test machine, user-friendly installation to the machine table use;
Button configuration and operation is simple and easy to use; can be installed in a variety of test machines and fixtures to use as a dedicated test machine;
RS-232C serial output function, with complimentary matching synchronization software, test data can be input into the computer via a data line to get tested
Graphs, and can export to do all kinds of detailed analysis.

Year warranty and lifetime maintenance.

model: HP-2 HP-3 HP-5 HP-10 HP-20 HP-30 HP-50 HP-100 HP-200 HP-300 HP-500 HP-1K
Maximum load: 2N 3N 5N 10N 20N 30N 50N 100N 200N 300N 500N 1000N
Division value: 0.001N 0.001N 0.001N 0.01N 0.01N 0.01N 0.01N 0.1N 0.1N 0.1N 0.1N 1N
sensor: Built-in sensors
Accuracy: ±0.5%
Dimensions: 230x66x36mm

NK Series force gauge

Function: NK Series Analog Force Gauge is a small simple thrust, tensile testing equipment, has a fine design, easy to carry, peak hold both units simultaneously display and so on.

Widely used in high and low voltage electrical appliances, electronics, wire, hardware lock, auto parts, lighters and ignition devices, pens, light industry, construction, fishing, textiles, chemicals, machinery and research institutions and other industries for the sliding load test, plug force testing, destructive testing, is old-fashioned alternative tube-type push pull gauge.

Pointer instructions, easy reading, accurate, high precision;
Dual display two kinds of units, no unit conversion;
Peak hold and load real-time value indication freedom to switch
Handheld design, simple operation, and can be installed in various types of table, but also various types of adaptation fixture, facilitate the testing of various products;
One year warranty and lifetime maintenance.

model: NK-10 NK-20 NK-30 NK-50 NK-100 NK-200 NK-300 NK-500
Maximum load: 10N 20N 30N 50N 100N 200N 300N 500N
Division value: 0.05N 0.1N 0.2N 0.25N 0.5N 1.0N 2.0N 2.5N
Accuracy: ±1%