Ming-wai switching power supply RS-15-12 15W 12V1.3A yijishouquanjingxiaoshanghanshuifa

Ming-wai switching power supply RS-15-12 15W 12V1.3A yijishouquanjingxiaoshanghanshuifa
 

Product description:

Product parameters:

  • Brand: MW / Ming-wai
  • Model: RS-15-12
  • Modulation: Pulse width modulation
  • Connection: full-bridge
  • Function: Power transformer


■ Optional accessories
■ Product description

High reliability switching power supply models can withstand 5G vibration and 70 ° C high operating temperature, the whole use of 105 ° C high life electrolytic capacitors, can withstand 300VAC surge input for 5 seconds, suitable for use in more stringent working environment , Respectively.

■ Main features
Universal universal AC input voltage
No-load loss <0.5W
All capacitors are 105 ℃ long life capacitor
Short circuit protection / overload protection / over-voltage protection / over-temperature protection
International safety certification: UL / TUV / CE
Shanghai Lez Technology Development Co., Ltd. Production
5 seconds to withstand 300VAC high voltage input is not damaged
Working environment temperature up to 70 ℃
Can be resistant to 5G vibration
Small size, high power density
LED indicates the operating status
High efficiency, long life, high reliability
Natural ventilation cooling
100% full load burn-in test
Can be used for a variety of extreme environmental applications
Lead-free process, in line with environmental RoHS requirements
Taiwan Ming-wai brand, Suzhou factory production
3 year warranty
■ The main parameters
DC output range 12V, 0-1.3A
Output voltage accuracy ±1%
Ripple 120mV
effectiveness 81%
Input voltage range 85 ~ 264VAC / 120 ~ 370VDC (withstand 5 seconds 300VAC high-voltage input is not damaged)
Input inrush current Cold start, 230V when the 65A
Voltage adjustment range ± 10% of rated output voltage
Overload protection Over-current point of> 105%, automatic detection of automatic recovery
Over-voltage protection 115% ~ 135% of the rated output voltage is turned off, automatic detection of automatic recovery
Overheat protection Transistor internal temperature exceeds 140 ℃ when the node off, automatically detect the automatic recovery
Start Rise Hold Time 230VAC full load 1000ms, 30ms, 70ms
Lezi home franchise stores All rights reserved
Insulation properties Between the input and output: 3KVac, between the input and the shell: 1.5KVac, between the output and the shell: 0.5KVac, 1 minute
Operating temperature -20 ~ + 70 ℃ (refer to the temperature load curve)
Anti-vibration 10 to 500 Hz, 5 G for 10 minutes / cycle, and 60 minutes for XYZ axes
Safety Certification Through UL1012, TUV UL60950-1 certification
Electromagnetic Compatibility Standard Emission: EN55022 (CISPR22) class B Harmonics: EN61000-3-2, -3
Electromagnetic Compatibility Standard Anti-interference: EN61000-4-2,3,4,5,6,8,11, ENV55024, EN61000-6-1, A light industry standards
Mean time between failures ≥1608,800 hours, MIL-HDBK-217F (25 ℃)
Wiring 5P / 7.62mm terminal block
Dimensions 62.5 × 51 × 28mm (length × width × height)
Chassis number 971A
Weight and packaging 0.13 kg / box; 108 per box / 15 kg / 0.0201 cubic meters

■ Optional rail mounting

Installation instructions

model:
Shell type switching power supply

Description:
Shell-type power supply includes a metal shell and plastic shell models, the internal PCB board is wrapped by the shell, usually installed in the system cabinet.Mingway power supply according to the power rating and design concept is divided into two different types: one is built-in Cooling fan, and the other is without a fan.

installation:







1. Before installation or maintenance work, disconnect the power supply from the application system and ensure that it is not automatically reconnected without notice!
2. Please ensure that the mounting screws are at a safe distance from the internal components of the power supply. Please refer to the housing diagram on the sample manual for the most suitable mounting screws. 'Buy a power supply for Leitz with Mingwei'. For questions call 400 600 0430.
3. The non-standard mounting direction or the power supply operating at high ambient temperature will cause the temperature of the internal components of the power supply to rise and should be used for derating. Please install according to the optimum installation direction and determine the power supply according to the temperature-load curve. Good work load.
4. Fans and vents should not be obstructed by anything. If there are other heat sources nearby, keep at least 10-15 cm
5. The recommended wire sizes are as follows
AWG 18 16 14 12 10 8
Rated current (A) 6A 6-10A 10-16A 16-25A 25-32A 32-40A
Wire cross-sectional area (mm square) 0.75 1.00 1.5 2.5 4 6
Note: The maximum surge current is only applicable to 1-4 core, 5 core surge current can not exceed the rated current of 80%
Make sure that all wires of the wire are in the terminal block and that the terminal screws are tightened to prevent poor contact.
6. Additional information about the product can be found on this website

Warning !!

1. To prevent electric shock and burn risk, all power supply faults should be checked by a qualified electrician. It is strictly forbidden to remove the power supply enclosure.
2. Do not install the power supply in a humid environment or near water.
3. Do not expose the power source to high temperatures and near sources of ignition. Refer to the specifications to determine the maximum ambient temperature for the power supply application.
4. The output voltage and output current can not exceed the ratings specified in the specifications.
5. The ground wire (FG) must be connected to the ground. 'Buy a power supply to find Lezi with Mingwei'. If you have any questions, please call 400 600 0430.
6. Since all power supplies are part of the application system, when the power supply is integrated into the application system, the EMC of the final system will need to be re-tested to confirm that the power supply is only one part of the application system,