TP-LINK TL-CPE510 outdoor wireless bridge 5.8G power ap cpe Elevator Monitoring 10 km

TP-LINK TL-CPE510 outdoor wireless bridge 5.8G power ap cpe Elevator Monitoring 10 km

Product description:

Product parameters:

  • Brand: TP-Link / Cape linking technology
  • Model: TL-CPE510
  • Network device type: Wireless Bridge


1. The bridge must only be used between two points visible, can not have a barrier (mountains, buildings, trees, etc.)

2.This price is the price of units 1, 2 at least before you can use

3. This item You can not rub network nor receive Mobile, China Unicom, China Telecom's wireless signal Very suitable for rural coverage point backbone transmission, wireless monitoring project, Wi-Fi sharing.

4. This product is 5.8G wireless frequency, the less people use, more stable, bandwidth, 300M, under no circumstances can stop transmission 10-15KM.

No barrier can be achieved depending on the circumstances under wireless transmission of 5-15 km bridge, outdoor professional design, outdoor waterproof housing, Suitable sites, residential, rural, plants, elevators, oil, roads, forest fire prevention and other wireless monitoring project

processor Qualcomm Atheros MIPS processor Industrial
Mounting Pole mounting
Wireless Standard IEEE 802.11a / n
Proprietary protocol TP-LINK MAXtream TDMA
Wireless transmission rate Working frequency: 5.15 ~ 5.85GHz (China) wireless speeds: 300Mbps
Wireless transmission rate Working frequency: 5.15-5.85GHz (China) wireless speeds: 300Mbps
Maximum transmit power 27dBm / 500mw
antenna Built-in 13dBi dual-polarized antenna
Farthest distance wireless transmission (environment without interference) 15 km or more
port A 10 / 100Mbps shielded RJ45 port (LAN0 / POE) 1 Ge 10 / 100Mbps shielded RJ45 port (LAN1)
Power supply 24V / 1A Passive PoE power supply, power range up to 60M
Lights PWR, LAN0, LAN1, 4 signal strength indicator
Antenna coverage angle Horizontal: 45 °
Vertical: 30 °
Dimensions (L × W × H) 224x79x60 (mm)
Environment Working temperature: -30 ℃ to 70 ℃, Humidity: 10% to 90% RH non-condensing
Storage temperature: -40 ℃ to 70 ℃, storage humidity: 5% to 90% RH non-condensing
Lightning, dust, water level 4kV lightning protection, 15kV ESD protection
ASA plastic housing, IP55 rating against dust and water
Wireless mode AP, Client, Bridge, Repeater, AP Router, AP Client Router (WISP Client)
Network Settings WAN connection: Static IP, dynamic IP, PPPoE, L2TP, PPTP
LAN port connection: Static IP, dynamic IP, DHCP
Forwarding rules: DMZ, ALG, UPnP, Virtual Server, Port Triggering
Network Security: SPI firewall, Ping ban, VPN, DoS attack prevention
Access Control
Static Routing
Bandwidth Control
IP-MAC binding

wireless setting TP-LINK MAXtream TDMA technology
802.11b / g / n mode
Automatic Channel Selection
Transmit power adjustment
Dynamic Frequency Selection (DFS)
Wireless Security: WPA / WPA2, WPA-PSK / WPA2-PSK (AES / TKIP) encryption 64/128/152 bit WEP encryption
SSID Broadcast / Hide
Multi-SSID, SSID and Tag VLAN Mapping (AP mode only)
Distance setting, ACK timeout settings
Wireless MAC address filtering
Advanced Settings: Beacon slot, RTS Threshold, Fragmentation Threshold, DTIM Room

Management and maintenance Unified management by Pharos Control centralized management software
HTTP / HTTPS WEB management
System Log
SNMP Agent (v2c)
Ping Watchdog
Dynamic DDNS
SSH server

System Tool System status: signal strength, noise level, transmission CCQ, CPU usage, memory usage
Status Monitoring: Throughput / wireless client / Interface / ARP / routing / WAN / DHCP server
Spectrum Analysis
Rate Test

System Optimization IGMP Snooping to optimize multicast proxy
Hardware Watchdog