Wah H3C EWP-WA2620i-AGN | Indoor 300M trillion wireless bridge AP Access Point | Dual Band

Wah H3C EWP-WA2620i-AGN | Indoor 300M trillion wireless bridge AP Access Point | Dual Band

Product description:

Product parameters:

  • Product Name: Huawei 3Com WA2620i-AGN
  • Brand: H3C
  • H3C Model: WA2620I-AGN
  • Color Classification: white
  • Whether wireless: Wireless
  • Wireless transmission speeds: 300Mbps
  • Wired transfer rate: 10/100 / 1000Mbps
  • Wireless transmission rate: 300Mbps
  • Networking standards: 802.11b 802.11g 802.11a 802.11n 802.3u 802.3
  • Wireless network support frequency: 2.4G & 5G
  • Number of USB interface: Does not support
  • Whether to support VPN: does not support
  • Are built-in firewall: No
  • Support WDS: Support
  • Whether to support WPS: does not support
  • Are Detachable: can not be demolished
  • Service: Genius
  • Condition: New
  • Packaging volume: 160x160x50mm
  • GW: 1kg

Intelligent cloud access and wireless network TCO

WA2600 i Series AP comply with 802.11n protocol standards, a professional modular design, can provide up to 300Mbps single-radio wireless access speed is about the same environment 802.11a / b / 6 times g products through built-in integration-aware terminal hardware aspects of smart antenna overlay technology that can effectively from the coverage, access density, higher performance and stable operation of mobile cloud access services and to help users achieve wireless network TCO (total cost of Ownership / total cost of Ownership).

Green low-carbon design

WA2600 i Series AP a professional green low-carbon design, supports dynamic MIMO power saving mode (DMPS) and enhanced power-saving automatic transmission (E-APSD), intelligent identification terminal actual performance requirements, rationalize the deployment of the terminal sleep queue dynamically adjust MIMO work mode.

WA2600 i Series AP supports Green AP mode, single-antenna standby, saving more accurate.

WA2600 i Series AP through innovative per-packet power control (PPC) technology, in ensuring the successful transmission of packet can be dynamically adjusted AP premise equipment and clients direct bi-directional power to the device to reduce power consumption and extend the mobile terminal standby duration of action.

Gigabit Ethernet wired connection

Uplink Gigabit Ethernet interface, breaking the limitations of traditional Fast speed, wired so that the mouth is no longer a bottleneck speed wireless access for the future to support higher rates more RF portfolio provides a smooth upgrade platform.

Support Fat / Fit two modes

WA2600 i Series AP supports Fat and Fit work modes, according to the needs of network planning, the flexibility to switch between Fat and Fit work modes, and the user depending on the application needs, the flexibility to choose the necessary equipment factory version (Fat mode version of the Fit mode version).

When a customer's wireless network initial smaller scale, customers simply purchase the appropriate wireless device, and set its operating mode to Fat mode. With the continuous expansion of the size of the customer network, when the network application of wireless devices reach tens or even hundreds , in order to reduce the complexity of network management, we recommend that customers purchasing H3C independent research and development of WX series wireless controller equipment for centralized management of all network WA2600 i series wireless devices, then just to switch the operating mode to Fit mode .

Mode switching process requires only a simple command line and batch execution by network management device, is conducive to the customer's wireless network consists of a small network smooth upgrade to large networks, in order to better protect the user's investment, very suitable for large-scale carrier-class wireless smooth upgrade and expansion of the network.

Provide local forwarding

When WA2600 i Series AP (Fit mode) via a WAN forwarding, wireless access devices deployed in branch offices, and wireless controllers are deployed at the headquarters, all user data sent by the wireless device to access the wireless controller, and then by wireless control is centralized forwarding. WA2600 i series AP can be packets on the wireless access equipment directly into the wired packet format so that the data packets without the wireless controller, but in the local forwarding, a significant reduction in cable bandwidth.

Support IPv4 / IPv6 dual-stack (Native IPv6)

WA2600 i series AP fully support IPv6 features, the device implements the IPv4 / IPv6 dual stack. Whether the existing wired network is IPv4 or IPv6, can be automatically registered with the WX Series controllers provide WLAN service, the network will not be information silos.

Support RealTime Spectrum Guard (real-time spectrum protection) mode

RealTime Spectrum Guard (RTSG) is H3C innovation on the professional environment monitoring program for wireless spectrum state. H3C WA2600 i Series AP supports built-in RF acquisition module, the depth of integration and real-time monitoring of the radio frequency spectrum protection.

RTSG console fusion deployed H3C iMC intelligent management center management through CAPWAP tunnel with Sensor AP communication and data acquisition, wireless Environmental Quality 7X24-hour surveillance, wireless networking capabilities to assess trends and unlicensed interference alarm. Graphically way, the initiative to detect and identify all 2.4GHz / 5GHz band RF interference sources (Wi-Fi or Wi-Fi), provides real-time FFT graph, spectral density plot, spectra, duty cycle, event spectrum, channel power, interference power, etc; can automatically identify the source of interference, determine the location of problematic wireless devices, ensure that the wireless networks can combine the performance of H3C iAR intelligent reporting module, enabling storage RF quality history of the whole coverage area, retroactive. , playback automatically generate customized trend, compliance and audit reports.

For different levels of user needs wireless environmental monitoring, can be flexibly deployed RTSG program using Local mode or Monitor Mode. When working in Local Mode, you can get efficient spectrum protection under the premise of maintaining a normal user access and packet forwarding .

EAD offers wireless access

Terminal Access Control (EAD, End user Admission Domination) solution from the control user access to the network terminal security angle start, integration of network access control and endpoint security products, access network user terminal to enforce corporate security policies, through after the security policy server interaction, can be infected with the virus or the existence of loopholes in the system and other unqualified wireless client offline, isolation, reminders, or handling a variety of ways of monitoring, only wireless client complies with security policies before allowing access the network, thereby increasing the overall security of the wireless network.

Supports remote probe analysis

WA2600 i series AP support Sensor device as a remote probe analysis can be Wi-Fi coverage area packet capture and listen to the local real-time image analysis equipment for network administrators for troubleshooting, optimization analysis. Remote Probe needle-free analysis capabilities converge either mirror for working channel, all channels can also poll sampling, the flexibility to meet wireless monitoring network operation and maintenance requirements.

Built-in RF Optimization Engine (ROE)

WA2600 i Series AP Built-in RF optimization engine (RF Optimizing Engine), by RF optimization based on features and protocols, effectively enhance the wireless deployment application acceleration capabilities and quality assurance effects of high-density access, streaming media and other scenes in which contains: multi-user fair scheduling, hybrid access fair, filtered interference, excellent rate, spectrum navigation, enhanced multicast (IPv4 / IPv6), per-packet power control and intelligent bandwidth protection.

Support intelligent load balancing

WA2600 i Series AP supports the complicated balance way to access the number of users and traffic, found that when the wireless controller wireless access equipment load exceeds a set threshold after the user of the wireless controller for the new access will automatically calculate this whether the user surrounded by a lightly loaded wireless access equipment for users to access, if there is associated with the user's request is denied, the user turns to access other wireless access equipment load is light, but if the wireless user is not overlapping coverage area, the traditional load balancing methods often lead to disconnection of the network, the wrong balance. H3C innovative company supports intelligent load balancing technology to ensure that only overlap in the coverage area of ​​a wireless user to start the load balancing function effectively avoid false equilibrium occurs, which limits the increase wireless network capacity.

Providing only 11n access function

Because 802.11n backward compatible with 802.11a / b / g protocol, so under normal circumstances, 802.11a / b / g users can access up to 802.11n wireless access device. However, this compatibility is provided, will cause users have the ability to access real 802.11n performance using a certain degree of decline. H3C supported a RF wireless access equipment is set up only 11n access mode, so users 802.11n bandwidth is guaranteed for part may be provided at the same time dual access capability of the 802.11n wireless access devices at work is recommended to set only 11n 5GHz radio access mode, to ensure that the user's access to high-speed 802.11n bandwidth and access performance; and 2.4GHz radio set compatible access model to ensure that the existing 802.11b / g users can normally access.

Support Chinese SSID

WA2600 i Series AP supports the use of Chinese SSID, you can specify a length of 32 characters SSID, it can also be used in English mixed SSID, for domestic users to provide greater ease of use.

Support TR-069 characteristics (CWMP)

WA2600 i AP supports TR-069 series feature, this feature help network from the network side of the scattered locations of wireless access equipment for remote centralized management. TR-069 is a DSL Forum (www.dslforum.org) developed a series of technology one specification, its wholly-called 'CPE WAN management protocol'.

Full support for intelligent wired and wireless integrated management

H3C full range of wireless products can achieve WSM-based wired and wireless integrated management through open network management protocol.

WSM is H3C next-generation business software platform iMC (intelligence Management Center / Intelligent Management Center) on the basis of the development of wireless operator management component, not only provides a flexible component selection for the administrator, while the industry mainstream SOA architecture, good scalability to meet the needs of growing customer network management. web-based management system for the wireless business managers to provide a simple, friendly management platform and iMC intelligent management platform and other components, but also wireless devices panel management, fault management, performance monitoring, software version management, configuration file management, user access management and other functions, and other devices on the network for unified management, intelligent wired and wireless integrated management.

Hardware Specifications







Dimensions (excluding antenna interfaces and accessories)



1000M Ethernet port (scalable optical transport)



Support 802.3af / 802.3at compliant power-sourcing

Local power supply

Support 48V DC

Console port


Built-in antenna

4x4 hardware built-in smart antenna system (base gain 4dBi)

External antenna connector

2 RP-SMA RF Interface

4 RP-SMA RF Interface

Working frequency

802.11b / g / n: 2.4GHz-2.483GHz (China)

802.11a / n: 5.725GHz-5.850GHz (China)
802.11b / g / n: 2.4GHz-2.483GHz (China)


OFDM: BPSK @ 6 / 9Mbps, QPSK @ 12 / 18Mbps, 16-QAM @ 24Mbps, 64-QAM @ 48 / 54Mbps
DSSS: DBPSK @ 1Mbps, DQPSK @ 2Mbps, CCK@5.5/11Mbps

Transmit power

Transmit power le; 20dBm, equivalent EIRP26dBm (smart antenna combination)

Adjustable power size


Reset / Initialize

stand by

Status Indicator

Blink alternately flashing mode, RGB mode flashes different working conditions, breathing flashing mode terminal access

Operating Temperature / Storage Temperature

-10oC ~ 55oC / -40oC ~ 70oC

Humidity / storage humidity

5% to 95% (non-condensing)

Protection class


Total power consumption

lt; 12.95W

Safety specifications

GB4943, EN60601-1-2 (medical), UL / CSA 60950-1, EN / IEC 60950-1, EN / IEC 60950-22


GB9254-2008, EN301 489, EN55022, FCC Part 15, RSS-210

RF certification

FCC Part 15, EN 300 328, EN 301 893, the Ministry of Radio Transmission Equipment Type Approval


FCC Bulletin OET-65C, EN 50385, IC Safety Code 6


gt; 250000H

Software Specifications




Product Positioning

Indoor single-frequency discharge means

Indoor dual-release mount

11n support

The number of spatial streams (Streams)


Working frequency


2.4GHz and 5GHz

40MHz Bundle

Support (2.4GHz not recommended)

Hardware smart antenna system

stand by

300Mbps (PHY)

stand by


stand by

Similarity demodulation (MLD)

stand by

Beam switching molding (TxBF)

stand by

The combined ratio received (MRC)

stand by

Space Time Block Code (STBC)

stand by

Low density parity check code (LDPC)

stand by

WLAN infrastructure

The number of users per radio access

250 (the actual number of users depending on the application environment and other factors are different)

Virtual AP (practice recommended setting up five per RF)



open system / shared key authentication

stand by

Broadcast Probe request response control

stand by

WPA, WPA2, Pre-RSNA hybrid access user

stand by


stand by


stand by


stand by

WLAN Expansion

STA Related

Anomaly detection offline support STA, STA aging, STA-based statistics and status inquiries

User access limit

stand by

Link integrity test

stand by

Client mode

stand by

Repeater mode

stand by

Multi-user fair scheduling

stand by

Weak Signal prohibited user access

stand by

Gaomi deploy application optimization

stand by

security strategy


Supports 64/128 bit WEP, dynamic WEP, TKIP, CCMP (11n recommended) encryption

It supports a variety of key update triggers dynamic update unicast / broadcast key


stand by


Optional support


Supports 802.1x authentication, MAC address authentication, PSK authentication, Portal authentication
(Depending on the application may be required, H3C WX series multiservice wireless controllers fit)

User isolation

stand by:

1, wireless Layer 2 isolation

2, based on the SSID of the wireless user isolation

Forward Secrecy

It supports packet filtering, MAC address filtering, Broadcast storm suppression

Wireless Endpoint Admission

Support / Wireless EAD

SSID and VLAN binding

stand by

Intelligent wireless service awareness (wIAA)

stand by


stand by

Real-Time Spectrum Protection (RTSG)

stand by


Radius Client

stand by

Multi-domain authentication server configuration

stand by

Authentication servers.

stand by

Two three-function

IP address settings

Support: Static IP address (FAT) or DHCP to obtain an IP address (optional option 60)

Native IPv6

stand by

IPv6 Portal

stand by


stand by


Support (IPv4 / IPv6)

Local Forwarding

Support: Based on local SSID + VLAN forwarding


IGMP Snooping / MLD Snooping

service quality


Support WMM


Ethernet port 802.1p identification and marking

Priority to support wireless wired precedence mapping

QoS policy map

Support different SSID / VLAN mapping of different QoS policies

Support L2 ~ L4 packet filtering and traffic classification

stand by


stand by

User Bandwidth Management

Per STA may allocate the available bandwidth, or assign all STA share total bandwidth according to SSID

Intelligent bandwidth guarantees

stand by:

When traffic is not congested, ensure that packets of different priorities under the SSID can be freely through; when traffic congestion, ensuring that each can maintain their SSID agreed a small bandwidth

Load Balancing

Support: traffic, users, bands (dual support) based on

Spectrum navigation

stand by

Enhanced Multicast

Support: Unicast Multicast forwarding (IPv4 / IPv6)

CAC (Call Admission Control)

Support: based on number of users and the channel utilization based

SVP Phone

stand by


Support: P2P / P2MP, WDS link PSK authentication and encryption, flexible neighbor discovery

Green energy

Per-packet power control (PPC)

stand by

Green AP mode

stand by

Dynamic MIMO Power Save

stand by

Enhanced automatic power transmission (E-APSD)

stand by

WMM Power Save

stand by

Management and maintenance

Network management

TR-069, SNMP V1 / V2c / V3, Trap, HTTP (S), SSH, Telnet, FTP / TFTP

Management SSID

stand by



Remote probe analysis

stand by

bootware backup

stand by