|[Digital Electronics] - [Network equipment]|
8-Port POE Power Switch for PoE Switch-Compatible Network Cameras and Wireless AP Power Supply
Ningxia, Qinghai, Tibet, Xinjiang, Inner Mongolia, Jilin, Liaoning, Heilongjiang, Gansu and Hong Kong, Macao and Taiwan regions are not included in the package, please understand.
Support back to network mode or isolated mode : Port 1-8 isolated from each other to connect the user's computer or other switches, UPLINK uplink router
Loop detection technology : Loop detection technology can quickly and efficiently cut off the network port (Due to the user or other malicious switch will be directly connected to the two ports, or cable 12 pairs of 36 pairs of short ), Shut down the loop within 3 seconds does not affect the other port to work properly, to ensure the efficient operation of the entire network! And exchange the STS indicator light warning.When the switch port loop is generated, the loop port is always closed; must plug the network cable or the end The switch is powered down to restore the normal operation of the port.
Port deceleration 10M mode : All corridor switches can support part of the port work in low-speed 10M negotiation modeDo not need to force the computer network card rate ); In low-speed mode can effectively extend the transmission distance of the cable (according to the different transmission quality of different cable); break the Ethernet standard maximum 150 meters limit, can be low-cost effective solution to some relatively far user broadband.
Lightning protection : SF1008MV each network cable port are used high-speed high-current surge absorber device (10000V / 150A / 3 nanoseconds response 10W times self-recovery TVS lightning protection); can quickly absorb the induction energy mine, Of the power, especially the port 8 can fight against a single cable lightning; if you have access to safe conditions, can open the case, the motherboard and the earth to connect; lightning will no worries!
9 port POE switches are One for the reduction of network congestion, support long-distance network power supply, to achieve data conversion POE Switch, which has both the basic functions of the switch while supporting POE power supply. Each POE power supply port can provide up to 15.4W of power, can be wireless AP , IP Cameras, network remote devices such as power supply, plug and play ,Providing low cost and high performance network solutions
For wireless AP , Web video camera, IP Telephone, wireless bridge, IP Print server, video HD digital and other passive power supply equipment
l8 all isolated lightning 8 electric power supply, short circuit, overcurrent, overvoltage protection.
l 8 POE Ethernet power supply ports, each port can provide 15W.4power.
l 8 10 / 100Mbps Adaptive RJ45 port ,Support auto flip (Auto-MDI / MDIX)
l UTP Port support auto-negotiation function, automatically adjust the transmission mode and transmission rate;
l Fully compatible with Ethernet applications, Internet systems, reduce network costs
l All ports are supported IEEE 802.3x Half-duplex flow control and full-duplex backpressure mode
l Non-blocking switching architecture ,Full wire-speed forwarding and maximum throughput filtering packets
l stand by MAC Address learning, Automatically adjust the transmission mode and transmission rate
l led Indicating power and Link /Activity , Provide simple working status tips and troubleshooting
l Steel shell design, good heat dissipation and stable performance