'Machine with wire tapping' HSS high hardness grinding machine tapping machine can also be hand tapping M2-M24

'Machine with wire tapping' HSS high hardness grinding machine tapping machine can also be hand tapping M2-M24
 

Product description:

Product parameters:

  • Brand: BRT / Bai Reiter
  • Color Classification: M1.0 * 0.25 tooth (machine) M1.2 * 0.25 (machine) tip M1.4 * 0.3 tooth (machine) tip M1.6 * 0.35 tooth (machine) M1.7 * (Machine) M2.5 * 0.45 (machine) M2.6 * 0.45 (machine) Tip M3 * 0.5 Tooth (machine) Tip M3.5 * (Machine) M6 * 1.0 (machine) M8 * 1.25 (machine) M10 * 1.5 (machine) M12 * 0.7 Tooth (machine) * 1.5 tooth (machine) M14 * 2.0 tooth (machine) M14 * 2.0 tooth (machine) M16 * 2.0 tooth (machine) 〓 〓 10 sets (wire tapping suit) 〓 〓 8 sets (wire tapping hinge) 〓
  • Item: Machine Taps M2-M16


Minimum 5 characters
Minimum 5 characters

Note: The value of a single batch of manual measurement, there is a certain error, please prevail in kind, mind careful shot or contact customer service! Unit: mm
specification M1 M1.2 M1.4 M1.6 M1.7 M2 M2.5 M2.6 M3 M3.5 M4 M5 M6
Pitch 0.25 0.25 0.3 0.35 0.35 0.4 0.45 0.45 0.5 0.6 0.7 0.8 1
Tooth length 8 8 8 8 8 12 12 15 15 16 18 22 25
Total length 35 35 35 35 35 45 46 45 45 53 50 55 60
specification M8 M10 M12 M14 M16 M18 M20 M22 M24 M3 M4 M5 M6
Pitch 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 0.35 0.5 0.5 0.5
Tooth length 22 22 30 32 35 37 45 40 47 14 17 28 28
Total length 65 70 80 100 100 115 110 117 130 50 55 65 70
specification M6 M7 M7 M8 M8 M9 M9 M9 M10 M10 M10 M12 M12
Pitch 0.75 1 0.75 1 0.75 0.5 0.75 1 0.75 1 1.25 0.5 0.75
Tooth length 28 20 22 20 22 18 20 21 21 21 25 27 22
Total length 70 65 65 65 70 70 60 75 75 75 77 80 80
specification M12 M12 M12 M13 M13 M13 M14 M14 M14 M16 M16 M16 M16
Pitch 1 1.25 1.5 1 1.5 1.25 1 1.25 1.5 1 1.5 1.25 1.5
Tooth length 22 25 30 22 30 32 22 25 32 22 23 35 23
Total length 80 90 90 85 95 80 85 90 95 90 90 90 90
specification M18 M18 M18 M20 M20 M14 (anti-tooth) M16 (anti-tooth) M18 (anti-tooth) M20 (anti-tooth)
Pitch 1.25 1.25 1.5 1 1.5 1.5 1.5 1.5 1.2
Tooth length 30 30 32 25 30 28 28 32 32
Total length 105 105 105 100 105 90 90 100 100
Note: The above data is for reference only, accurate data, please contact customer service request!

Specification table for bore diameter under thread

Wire tapping specifications Drill Bit Diameter 2 thread diameter Wire tapping specifications Drill Bit Diameter 2 thread diameter
Mm D- upper limit D-lower limit Mm D- upper limit D-lower limit
1/8-40 2.65 2.697 3.0×0.5 2.5 2.599 2.459
5/32-32 3.25 3.530 4.0×0.7 3.3 3.422 3.242
3/16-24 3.75 4.597 5.0×0.8 4.2 4.334 4.134
1/4-20 5.10 5.257 6.0×1.0 5.0 5.153 4.917
5/16-18 6.60 6.731 8.0×1.25 6.8 6.912 6.647
3/8-16 8.00 8.153 10.0×1.5 8.5 8.676 8.376
7/16-14 9.40 9.550 12.0×1.75 10.3 10.441 10.106
1/2-12 10.70 11.020 12.0×1.5 10.5 10.676 10.376
5/8-11 13.70 13.860 12.0×1.25 10.8 10.912 10.647
3/4-10 16.70 16.840 14.0×2.0 12.0 12.210 11.835
7/8-9 19.50 19.760 14.0×1.5 12.5 12.676 12.376
1''-8 22.40 22.600 16.0×2.0 14.0 14.210 13.835
16.0×1.5 14.5 14.676 14.376
18.0×2.5 15.5 15.744 15.294
20.0×2.5 17.5 17.744 17.294
22.0×2.5 19.5 19.744 19.294
24.0×3.0 21.0 21.252 20.752
Minimum 5 characters