China H3C EWP-WA4320-ACN indoor wireless AP | fat and thin one | official website validation

China H3C EWP-WA4320-ACN indoor wireless AP | fat and thin one | official website validation
 

Product description:

Product parameters:

  • Brand: H3C
  • Model: WA4320-ACN
  • Network Device Type: Other


To achieve intelligent Gigabit cloud access and best wireless network TCO

The WA4300 series APs comply with the 802.11ac standard and offer a 2-stream wireless transmission rate of up to 866 Mbps and a full Gigabit access capability that is about three times that of 802.11n products in the same environment, , Access density, and stable operation, and help users achieve the best wireless network TCO (Total Cost of Ownership).

Green low-carbon design

Full-rate full-featured to meet the standard POE power supply (less than 12.95W).

WA4300 series AP adopts professional green low-carbon design, supports dynamic MIMO power saving mode (DMPS) and enhanced automatic power saving transmission (E-APSD), intelligent identification terminal actual performance requirements, rationalization deployment terminal sleep queue, dynamic adjustment MIMO work mode .

WA4300 Series AP supports Green AP mode, to achieve single-antenna standby, more energy efficient.

The WA4300 series APs dynamically adjust the bi-directional power of the AP and the client through the innovative packet-per-packet power control (PPC) technology to reduce the power consumption of the AP and prolong the standby time of the mobile terminal .

Support Fat / Fit two modes

The WA4300 series supports Fat and Fit modes, and flexibly switches between the Fat and Fit modes according to the network planning requirements. In addition, users can flexibly select the required equipment version according to the application requirements (Fat mode Version or Fit mode version).

When the initial size of the wireless network is small, customers only need to purchase the corresponding wireless devices, and set its working mode to Fat mode.With the continuous expansion of customer network size, when the network application of wireless devices to dozens or even hundreds H3C recommends that you purchase H3C's own WX series controllers to manage all the WA4300 series wireless devices in the network. In this case, you only need to change the working mode to Fit mode to reduce the complexity of network management.

The work mode switching process requires only simple command line and can be executed in batches through the device network management. It is beneficial to smoothly upgrade the customer's wireless network from a small network to a large-scale network, so as to better protect the investment of users. It is very suitable for large- Smooth expansion of the network upgrade.

Provides local forwarding

When the WA4300 series AP (Fit mode) is forwarded over the WAN, the wireless access equipment is deployed in the branch office and the wireless controller is deployed in the headquarters. All the user data is sent from the wireless access device to the wireless controller. The wireless controller The WA4300 series AP can directly convert the data packets to the wired format on the wireless access device so that the data packets can be forwarded locally without the wireless controller, thus greatly saving the cable bandwidth.

Supports IPv4 / IPv6 dual protocol stack (Native IPv6)

The WA4300 series AP supports IPv4 and IPv6 dual-protocol stacks, and can be automatically registered with the WX series controllers to provide WLAN services regardless of whether the existing wired network is IPv4 or IPv6. The WA4300 series APs do not become information in the network Isolated island.

RealTime Spectrum Guard mode is supported

RealTime Spectrum Guard (RTSG) is a professional monitoring solution for wireless environment, which is supported by H3C. The H3C WA4300 Series AP supports built-in radio frequency acquisition module for deep integration of RF monitoring and real-time spectrum protection.

The RTSG console is deployed in the H3C iMC Intelligent Management Center to communicate with the Sensor AP and collect data through the CAPWAP management tunnel to achieve 7X24-hour wireless environment quality monitoring, wireless network capability trend assessment, and unlicensed interference alarming. Spectrum spectrum, duty cycle graph, event spectrum, channel, frequency spectrum, and so on. It can detect and identify all RF interference sources (Wi-Fi or non-Wi-Fi) in the 2.4GHz / 5GHz band proactively. Power, interference power, etc .; can automatically identify the interference source to determine the location of the wireless device in question to ensure that the wireless network to play the best performance combined with H3C iAR intelligent reporting components, can achieve full coverage of the radio frequency quality history of storage , Tracking, playback, etc., automatically generate custom trends, compliance and audit reports.

The RTSG solution can be deployed flexibly with Local mode or Monitor Mode for different levels of wireless environment supervision. When working in Local Mode, you can maintain normal user access and packet forwarding while obtaining effective spectrum protection. .

Provides EAD radio access

End User Admission Control (EAD) is a solution that integrates the network access control and terminal security products from the perspective of controlling the security access network of the user terminals to enforce the enterprise security policy for the user terminals accessing the network. With the security policy server linkage, can be infected with the virus or the existence of system vulnerabilities and other unqualified wireless client offline, isolation, reminder or monitoring and other means of dealing with only the wireless client to comply with the appropriate security policy before allowing Normal access to the network, thereby enhancing the overall security of the wireless network.

Supports remote probe analysis

WA4300 Series APs support remote probe analysis, which can capture and capture the Wi-Fi packets in the coverage area and mirror them in real-time to the local network analyzer for network administrators to troubleshoot and optimize the remote probe analysis. Function can work for the channel for non-convergence of the mirror, you can poll all channels sampling, flexibility to meet the requirements of wireless network monitoring and operation and maintenance.

Built-in RF Optimization Engine (ROE)

The WA4300 AP integrates an RF optimization engine to optimize application acceleration and quality assurance in scenarios such as high-density access and streaming media over wireless deployments through feature-based and protocol-based RF optimization. User fairness scheduling, mixed access fairness, filtering interference, optimal rate, spectrum navigation, multicast enhancement (IPv4 / IPv6), packet-by-packet power control and intelligent bandwidth guarantee.

Supports intelligent load balancing

The WA4300 series APs support a complex equalization method based on the number of access users and traffic. When the load of the access controller exceeds the threshold, the controller automatically calculates the user for the new access user Whether there is a load of light around the wireless access device for users to access, if there will be rejected user association request, the user will instead access other load lighter wireless access equipment, but if the wireless user is not heavy In the traditional overlay area, traditional load balancing often leads to the problem that the connection is not connected to the network, causing erroneous equilibria. H3C's innovative support for intelligent load balancing ensures that the load balancing function is enabled only for wireless users in overlapping areas. Effectively avoid the emergence of error equilibria, thus maximizing the wireless network capacity.

Support Chinese SSID

WA4300 Series AP supports the use of Chinese SSID, can specify up to 16 Chinese characters SSID, you can also use a mixed Chinese and English SSID, for domestic users with greater ease of use.

Comprehensive support for intelligent wired and wireless integration management

H3C's full range of wireless products can be achieved through an open network management protocol based on WSM wired and wireless integrated management.

WSM is a wireless operation management component developed by H3C on the basis of the iMC (Intelligent Management Center), a next generation service software platform. It not only provides administrators with flexible component selection, but also conforms to the mainstream SOA architecture. Based management system to provide a simple and friendly management platform for wireless service managers.With the iMC intelligent management platform and other components, it can also realize the integration of the wireless devices and the network management system. Panel management, fault management, performance monitoring, software version management, configuration file management, access user management and other functions, and other devices in the network unified management, truly intelligent wired and wireless integration management.

Hardware specifications

Attributes

WA4320-ACN

weight

0.55 kg

Dimensions (without antenna interface and accessories)

54mm x 220mm X 220mm

1000M Ethernet port

1

PoE

Support 802.3af / 802.3at compatible power supply

Local power supply

Supports 48V DC

Console port

1

Built-in antenna

Built-in antenna system (operating frequency: 2.4G and 5G, the maximum gain of up to 7dBi)

Working frequency band

802.11ac / n / a: 5.725GHz - 5.850GHz; 5.47 - 5.725GHz; 5.15 - 5.35GHz (China)

802.11b / g / n: 2.4GHz-2.483GHz (China)

Modulation technology

OFDM: BPSK @ 6 / 9Mbps, QPSK @ 12 / 18Mbps, 16-QAM @ 24Mbps, 64-QAM @ 48 / 54Mbps
DSSS: DBPSK @ 1Mbps, DQPSK @ 2Mbps, CCK@5.5/11Mbps
MIMO-OFDM (11n): MCS 0-15

MIMO-OFDM (11ac): MCS 0-9

Modulation

11b: DSS: CCK @ 5.5 / 11Mbps, DQPSK @ 2Mbps, DBPSK @ 1Mbps

11a / g: OFDM: 64QAM @ 48 / 54Mbps, 16QAM @ 24Mbps, QPSK @ 12 / 18Mbps, BPSK @ 6 / 9Mbps

11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM

11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM

Transmit Power (Max)

20dBm

Adjustable power granularity

1 dBm

Reset / Restore the factory configuration

stand by

Status indicator

Blink Alternate blink mode, orange-green-blue blinking mode, terminal access breath flashing mode

Operating temperature / storage temperature

-10ºC to 55ºC / -40ºC to 70ºC

Operating Humidity / Storage Humidity

5% to 95% (non-condensing)

Degree of protection

IP41

Total power consumption

﹤12.95W

Safety specification

GB4943, EN60601-1-2 (medical), UL / CSA 60950-1, EN / IEC 60950-1, EN / IEC 60950-22

EMC

GB9254, EN301 489, EN55022, FCC Part 15, RSS-210

RF certification

FCC Part 15, EN 300 328, EN 301 893, Ministry of Industry and Radio Transmitter Type Approval

Health

FCC Bulletin OET-65C, EN 50385, IC Safety Code 6

MTBF

﹥250000H

Software specifications

Attributes

WA4320-ACN

Product Positioning

Indoor mounted dual-band

11ac support

Space Streams

2

Working frequency band

5 GHz

80MHz bundle

stand by

Hardware Built-in antenna system

stand by

866 Mbps (PHY)

stand by

A-MPDU

stand by

A-MSDU

stand by

Maximum similarity demodulation (MLD)

stand by

Maximum Merge-to-Receive (MRC)

stand by

Space-time block code (STBC)

stand by

Low-density parity-check coding (LDPC)

stand by

11n support

Space Streams

2

Working frequency band

2.4 GHz and 5 GHz

40MHz bundled

Support (2.4GHz not recommended)

Hardware Built-in antenna system

stand by

300Mbps (PHY)

stand by

A-MPDU

stand by

Maximum similarity demodulation (MLD)

stand by

Beam switching shaping (TxBF)

stand by

Maximum Merge-to-Receive (MRC)

stand by

Space-time block code (STBC)

stand by

Low-density parity-check coding (LDPC)

stand by

WLAN Basics

The maximum number of access users per radio

128 (the actual number of users because of the application environment and other factors there are differences)

Virtual APs (up to 5 per radio is recommended for practical applications)

32

Open system / shared key authentication

stand by

Broadcast Probe Request Reply Control

stand by

WPA, WPA2, and Pre-RSNA user hybrid access

stand by

RTS / CTS

stand by

CTS-to-self

stand by

Hide SSID

stand by

WLAN expansion

STA

Supports STA abnormal offline detection, STA aging, STA-based statistics and status query

Number of access users

stand by

Link integrity detection

stand by

Repeater mode

stand by

security strategy

encryption

Support 64/128-bit WEP, dynamic WEP, TKIP, CCMP (11n recommended) encryption

Supports multiple key update triggers Dynamically updates unicast / broadcast keys

802.11i

stand by

Certification

Support 802.1x authentication, MAC address authentication, PSK authentication, Portal authentication, and so on
(Depending on the application, H3C WX series multi-service wireless controllers may be required)

User isolation

stand by:

1, two-tier wireless users isolation

2, based on SSID wireless user isolation

Forwarding security

Supports packet filtering, MAC address filtering, and broadcast storm suppression

Wireless endpoint access

Support / Wireless EAD

The SSID is bound to the VLAN

stand by

Smart Wireless Service Awareness (WIAA)

stand by

WIDS / wIPS

stand by

Management Frame Protection (802.11w)

stand by

Real-Time Spectrum Protection (RTSG)

stand by

AAA

Radius Client

stand by

Authentication server Multi-domain configuration

stand by

Back up the authentication server

stand by

Two three functions

IP address settings

Support: static IP address (FAT) or DHCP get IP address (optional option 60)

Native IPv6

stand by

IPv6 Portal

stand by

IPv6 SAVI

stand by

ACL

Support (IPv4 / IPv6)

Local forwarding

Support: Local forwarding based on SSID + VLAN

Multicast

IGMP Snooping / MLD Snooping

service quality

802.11e

Support WMM

priority

Support 802.1p identification and tagging on Ethernet interfaces

It supports the mapping from wireless priority to wired priority

QoS policy mapping

Different SSID / VLAN mapping policies are supported

Support L2-L4 packet filtering and traffic classification

stand by

CAR

stand by

User Bandwidth Management

The available bandwidth may be allocated per STA, or the total bandwidth shared by all the STAs may be allocated according to the SSID

Load balancing

Support: based on traffic, users, frequency band (dual-band support)

Spectrum navigation

stand by

Multicast enhancement

Support: Multicast to unicast (IPv4 / IPv6)

CAC (Call Admission Control)

Support: Based on number of users and based on channel utilization

SVP Phone

stand by

Green energy saving

Packet-by-Packet Power Control (PPC)

stand by

Green AP mode

stand by

Dynamic MIMO power saving

stand by

Enhanced Automatic Power-Saving Transfer (E-APSD)

stand by

WMM Power Save

stand by

Management and maintenance

Network Management

TR-069, SNMP V1 / V2c / V3, Trap, HTTP (S), SSH, Telnet, FTP / TFTP

Manage the SSID

stand by

Log function

SYSLOG

Remote probe analysis

stand by