Switching power supply S-15-5 15W input AC220V | output 5V 3A

Switching power supply S-15-5 15W input AC220V | output 5V 3A
 

Product description:

Product parameters:

  • Brand: EMICORCOM
  • Model: S-15-5
  • Modulation: Pulse width modulation
  • Connection: full-bridge
  • Function: Power adapter


  • Low price, high reliability

  • 105 ℃ output capacitor

  • Global AC input voltage

  • High efficiency, low operating temperature

  • Soft-start current, effectively reduce the AC input shock

  • Short circuit protection, overload protection

  • Small size and light weight

  • 100% full load burn-in test

  • Built-in EMI filter, very small ripple

model


performance

S-15-5

S-15-12

S-15-24

DC output voltage

5V

12V

24V

Output Voltage Tolerance (Note 2)

±2%

±1%

±1%

Rated output current

3A

1.3A

0.7A

Output current range

0-3A

0-1.3A

0-0.7A

Ripple and noise (Note 3)

50 mVp-p

50 mVp-p

100 mVp-p

Line Stability (Note 4)

±0.5%

±0.5%

±0.5%

Load stability (Note 5)

±1%

±0.5%

±0.5%

DC output power

15W

15.6W

16.8W

effectiveness

65%

68%

72%

DC voltage adjustable range

±10,-5%

±10%

±10%

Input voltage range

85 ~ 132VAC / 170 ~ 264VAC switch selection

Input Current

0.5A / 115V 0.25A / 230V

Inrush current

Cold start current 15A / 115V 30A / 230V

Leakage current

<0.5mA / 240VAC

Overload protection

105% ~ 150% Type: Current limit reset: Auto recovery

Over-voltage protection

……

High temperature protection

……

Temperature Coefficient

±0.02%℃(0~ 50℃)

Start, rise, hold time

200ms, 100ms, 30ms

Earthquake resistance

10 ~ 500Hz, 2G 10min./1 cycle, duration 60 minutes, the axis

Pressure resistance

Input and output: 1.5KVAC, input shell: 1.5KVAC, the output shell: 0.5KVAC

Isolation resistance

Input and output, input and enclosure, output and housing: 0500VAC / 100M Ohms

Operating temperature, humidity

-10 ° C to + 60 ° C, and 20% to 90% RH

Storage temperature, temperature

-20 ℃ ~ +85 ℃, 10% ~ 95RH

Dimensions

99 * 97 * 35mm CASE: 905

weight

0.3Kgs

safety standard

Meet UL1012 requirements

EMC standards

Meet FCC Part15J condition CLASS B

Note: 1, the above parameters test conditions: 230VAC input, rated load, 25 ℃ 70% RH.
2, Tolerance: including setting tolerance, line stability, load stability (Note 5).
3, ripple test: 20MHz with A12 'twisted pair, interrupt with 0.1uF & 47uF capacitor short circuit.
4, into the line voltage stability test: full load into the lowest voltage to the highest voltage.
5, load stability test: load from 0% to 100%.