AP AP3010DN-AGN-CN Huawei Wireless AP | Dual Band | POE Power Supply AP | Power Supply

AP AP3010DN-AGN-CN Huawei Wireless AP | Dual Band | POE Power Supply AP | Power Supply
 

Product description:

Product parameters:

  • Product Name: Huawei / Huawei AP3010DN-A ...
  • Brand: Huawei / Huawei
  • Model: AP3010DN-AGN-CN
  • Color classification: milky white
  • Wireless: Wireless
  • Wireless transmission speed: 300Mbps
  • Cable transmission rate: 10/100 / 1000Mbps
  • Wireless transmission rate: 300Mbps
  • Network standards: 802.11b 802.11g 802.11n
  • Wireless network support frequency: 2.4G
  • After-sales service: Genius
  • Condition: New


This AP factory for the thin AP requires a wireless controller to use, if you do not want to use the controller alone, pre-purchase with the customer service to confirm a good free to help you upgrade fat AP mode, you can use alone, this AP supports POE , If you have a POE power supply device at the top, you can directly connect the power supply cable to use a Gigabit LAN port, with power, support POE power supply, built-in antenna, dual-band 2.4G and 5G support Fat thin one! Factory for the thin AP mode.

Huawei AP3010DN-AGN-CN wireless AP dual-band 1 Gigabit LAN dual-band

1GE mouth with power built-in antenna fat one thin default fat AP

Again: the default is fat AP, because the amount of large brush in advance we have a good fat AP, AP can be used directly, for thin , Please advance with the customer service instructions, remarks or consult customer service.

Product Type: AP3010DN-AGN

It is suitable for deployment in areas where building structure is relatively simple, area is relatively small, users are relatively concentrated, and areas with large capacity requirements, such as small conference rooms, small and medium-sized conference rooms, Bars, leisure centers and other scenes.
• IEEE 802.11a / b / g / n
• 2 × 2 MIMO (two spatial streams)
• Rate of 600Mbps
• Built-in antenna
• 17dbm




1. Console port.


2.ETH / PoE: 10/100 / 1000M, for wired Ethernet connection, and supports PoE function, used to connect the PoE switch or PoE power supply to the AP power.


3.Default: default button, long press to restore the factory defaults.


4. Power input interface: 12V DC.


5. Lock device lock interface: AP3010DN-AGN used to ensure the anti-theft security.

High-speed and reliable wireless access services

  • Compatible with IEEE 802.11a / b / g / n standards
  • Supports 2 × 2 MIMO, the highest rate of each radio up to 300Mbps
  • Support WMM agreement, support empty mouth and wired priority mapping
  • Supports integrity detection of wired links
  • Support load balancing
  • In Fit AP mode, users can switch between services without interruption
  • AC dual-link backup is supported in Fit AP working mode
  • Using the latest generation 802.11n chip technology, higher performance, more coverage

Perfect user access control

  • Support for user-based access control (ACL), based on user group policy, based on user implementation of access control
  • Supports fine-grained bandwidth management for individual users
  • Supports user isolation policies
  • Fit AP supports AC unified authentication


High level of network security

  • Support Open-System authentication
  • Support WEP (Wired Equivalent Privacy) authentication / encryption mode
  • Support WPA (WiFi protected access) / WPA2-PSK authentication / encryption mode
  • Support WPA / WPA2-802.1X authentication / encryption mode
  • Support WAPI (WLAN authentication and privacy infrastructure) authentication / encryption mode
  • Support WIDS, including illegal AP and STA detection, attack detection, STA / AP black and white list function


Flexible networking and environmental adaptability

  • Flexible networking capability to meet multiple networking scenarios. Mesh and WDS scenarios are supported in the Fit AP working mode.
  • Powerful environmental adaptability, automatic selection of transmission rate, channel and transmit power, adaptive RF environment, real-time avoidance of interference
  • Adaptive bandwidth management, automatically according to the number of users, the environment and other factors to adjust the user bandwidth allocation, improve the user experience

Simple device management and maintenance

  • Fit AP work mode, support AP automatic on-line function, and automatically load configuration, can be plug and play
  • Support batch automatic upgrade
  • Network management system real-time monitoring, remote configuration and fast fault location
  • Support LLDP link auto-discovery and fast network topology discovery
  • WLAN features

    • The AP3010DN-AGN is compatible with the IEEE 802.11a / b / g / n standard
    • The AP3010DN-AGN has a maximum speed of 300Mbps
    • Support for Maximum Merge Ratio (MRC)
    • Support for Maximum Likelihood Decoding (MLD)
    • Support for packet aggregation: A-MPDU (Tx / Rx), A-MSDU (Rx only)
    • The AP3010DN-AGN supports 802.11 Dynamic Frequency Selection (DFS)
    • Supports ShortGI in 20M and 40M modes
    • Priority-based data processing and forwarding based on WMM (Wi-Fi multimedia) mapping and priority scheduling rules for Wi-Fi multimedia standards
    • Supports automatic and manual two rate adjustment mode, the default mode is automatic rate adjustment mode
    • Support for WLAN channel management and channel rate adjustment
    • Support channel automatic scanning function, automatically avoid interference
    • Support for each SSID in the AP can be configured to hide the function independently
    • Supports SST (signal sustain technology)
    • Support U-APSD power saving mode
    • Fit AP work mode supports CAPWAP (control and provisioning of wireless access points) that is, wireless access point control protocol tunnel data forwarding
    • Fit AP works in automatic AP mode
    • Fit AP supports WDS mode
    • Fit AP works in mesh mode


    Network characteristics

    • Comply with IEEE 802.3u standard
    • Auto-negotiation and auto MDI / MDI-X for rate and duplex mode are supported
    • It supports VLAN division based on the SSID of user access
    • The upstream Ethernet port supports the VLAN trunk function
    • Support VLAN ID (1-4094), can be set for each RF 8 VAP
    • The management channel of the AP on the AP can be tagged and untagged
    • Supports DHCP clients to obtain IP addresses through DHCP
    • Support the business data tunneling and direct forwarding in two ways
    • It supports the access isolation between different wireless terminals in the same VLAN
    • Support for user access control (ACL)
    • LLDP link discovery is supported
    • Fit AP mode supports CAPWAP interrupt service hold in direct forwarding mode
    • Fit AP supports AC unified authentication
    • Fit AP supports AC dual link backup and VRRP hot backup in working mode


    QoS features

    • Priority-based data processing and forwarding based on WMM (Wi-Fi multimedia) mapping and priority scheduling rules for Wi-Fi multimedia standards
    • Support WMM parameters by RF
    • Support WMM power saving mode
    • Priority mapping and downstream traffic mapping are supported
    • Supports queue mapping and scheduling
    • Supports bandwidth-based per-user limits
    • Supports adaptive bandwidth management, automatically adjusts user bandwidth allocation according to the number of users and environment, and improves the user experience.


    Security features

    • Support Open-System authentication
    • Support WEP authentication / encryption mode
    • Support WPA / WPA2-PSK authentication / encryption
    • Support WPA / WPA2-802.1X authentication / encryption mode
    • Support WAPI authentication / encryption mode
    • Support WIDS, including illegal AP and STA detection, attack detection, STA / AP black and white list function



    Maintenance features

    • In the Fit AP working mode, centralized management and maintenance of APs through AC are supported
    • Fit AP work mode supports automatic AP on-line function, and automatically load the configuration, can be plug and play
    • FIT AP work mode supports WDS zero configuration deployment
    • Mesh zero configuration deployment is supported in Fit AP working mode
    • Support batch automatic upgrade
    • The AP supports two types of local management: Telnet and serial
    • The NMS supports real-time monitoring of user configuration information and fast fault location
    • Support AP system status alarm

    Basic parameters

    project description
    Physical parameters Dimensions (L × W × H) 180 mm x 180 mm x 50 mm
    weight 0.4 kg
    System memory 128 MB DDR2
    32 MB Flash
    Power supply parameters power input DC 12V ± 10%
    POE power supply: -48V DC
    Meet 802.3af / at Ethernet power supply standards

    Maximum power consumption 9.5W
    Note: Actual maximum power dissipation varies by country and region.
    Environmental parameters Operating temperature -10℃~ +50℃
    storage temperature -40℃~ +70℃
    Working humidity 5% to 95% (non-condensing)
    waterproof level IP31
    altitude -60m to 4000m