Taiwan Baogong lead-free adjustable temperature tin-plating furnace tin pot leaching tin furnace environmental melting small tin furnace 150w-300w

Taiwan Baogong lead-free adjustable temperature tin-plating furnace tin pot leaching tin furnace environmental melting small tin furnace 150w-300w
 

Product description:

Product parameters:

  • Brand: Pro 'skit / Po workers
  • Item No .: SS-552H
  • Color Classification: pot 38 wide * 35MM high 150W (250-550 degrees) melting tin amount 0.3KG pot 80 wide * 40MM high 250W (230-450 degrees) Melting volume 1.6KG pot 100 wide * 40MM high 300W (230-450) Degrees) Melting volume 2.2KG 500g Leaded solder bar
  • Decoration and construction content: installation works


There is a need to solder the friend, you can contact customer service to buy. 500g one, priced 55 yuan

Note: heating core and solder pot are consumables, not in the scope of the warranty mind carefully shot!


SS-551H 150W compact round tin furnace melting tin amount 0.3KG

SS-552H 200W compact round tin furnace melting tin amount 0.5KG

SS-553H 250W compact round tin furnace melting amount of 1.6KG

SS-554H 300W compact round tin furnace melting tin 2.2KG

  • Tin stove using electronic temperature control panels and high-quality components, adjustable temperature, stable performance.
  • Tin furnace using high-quality stainless steel titanium, providing better corrosion resistance and temperature performance, can be widely used in lead-free and lead-free process.
  • The use of iron-chrome aluminum wire heating element and ceramic tube insulated lead, fast heating more durable.
  • Stainless steel waste tin deposit plate to facilitate the recovery of waste tin work.
  • Excellent aluminum silicate insulation layer to reduce the ambient temperature, improve the working environment (non-asbestos), non-toxic, environmentally friendly.
  • Suitable for tin, glue, grease and other room temperature / low temperature easy to use condensed material dissolved.

SS-551H 150W compact round tin furnace melting tin amount 0.3KG

Product parameter table:

SS-552H 200W compact round tin furnace melting tin amount 0.5KG

Product parameter table:

SS-553H 250W compact round tin furnace melting amount of 1.6KG

Product parameter table:

SS-554H 300W compact round tin furnace melting tin 2.2KG

Product parameter table:

Precautions:

When the solder in the tin pot melts, its temperature is nearly 550 ° C and the wrong way of operation

May cause burns or fire, be sure to observe the following precautions.

1. Please operate on a high and stable metal table. Do not push in the work area

Put paper or other flammable and explosive items.

2. Please remind people near the work area not to approach or touch the high-temperature tin stove.

3. Do not put water into a high-temperature tin furnace, so as to avoid solder spatter or explosion.

4. Please do not let people who are unfamiliar with or do not understand the operating instructions

Practitioners may cause danger.

5. Do not disassemble or change the internal wiring of the solder pot.

6. Do not allow the stove to store in a water environment, water vapor into or wet hands

May increase the risk of electric shock.

7. Replacement parts, please use the original parts.

8. Please do not keep the tin furnace at a high temperature of 400 ~ 550 ℃ (about 7 ~ 9 grid between) environment

, So that the life of the heating element tends to be shortened.

Tin furnace temperature is commonly used 300 ~ 350 ℃ (about 2 to 4 files), adjust the settings lower

Applicable temperature, will help extend the life of tin furnace.

* Do not use sharp or hard objects struck or wipe the stove, so as not to cause scraping

Injury, resulting in long-term corrosion and then leakage tin leakage.

Instructions:

* When the first use of heating, there will be a little smoke, this is the normal situation, please feel at ease

use.

* Be sure to ground the ground wire before use. Do not use it under ungrounded conditions.

1. Turn on the power switch, adjust the temperature knob to the maximum temperature, one minute later

Tin wire / strip friction tin furnace wall, until the solder wire / bar dissolved solution of about 1/4 tin furnace height

After the friction to stop, directly into the tin furnace.

2. After the wire / strip is dissolved, it is recommended to adjust the temperature knob to 300 ~ 350 ℃ (about 2 ~ 4)

Stalls), if sustained at high temperatures will lead to rapid aging tin pot, dissolved

The solution of the solder will become yellow or black, if the flux contains more acidic substances,

Will corrosion tin furnace.

3. If not used for a short time, it is recommended to set the temperature to 'LO' to reduce the work

Consumption and to avoid solder oxidation.

4. Turn off the power switch when no one is using or looking after the stove.

Troubleshooting:

When the power switch is turned on and the oven is not warming up, make sure that the power cord is plugged in

Socket, if no action has been connected, please contact your local dealer.

Maintenance and cleaning:

1. Before cleaning, make sure that the oven has cooled down and unplugged the power cord.

2. Use a dry or slightly damp towel to clean it. Many detergents contain

The material may cause damage to the metal parts of the machine, so do not use it

Use other strong or flammable cleaning agents such as petrol, rosin, and turpentine

And other similar cleaners.

3. Please keep the dust away from overheating to prevent air leakage

Gradual erosion of the tin furnace to produce holes, and solder leakage is recommended to confirm

Tin furnace conditions to ensure the safe implementation of the work