- Brand: Puxicoo
- Model: D85-3050
- Item: 120805
- Color Classification: 0-199.9V 50.0A 0-199.9V 10.00A 0-19.99V 50.0A 0-19.99V 10.00A 0-600V 200A 0-199.9V 19.99A 0-600V 100A 0-199.9V 1.999A 0-600V 50.0A 0-600V 10.00A 0-199.9V 200A 0-199.9V 100A 0-19.99V 1.999A 0-199.9V 5.00A 0-19.99V 5.00A 50A shunt (excluding header) 100A shunt (excluding header)
- Renovation and construction content: Hydropower Engineering
Current is greater than 10A (including 10A) must be reprovision shunt, otherwise it will burn the table; Shunt sold separately , Shunt current size must be consistent and ordered instrument measuring range (example: Order 50A instrument should buy 50A / 75MV shunt)
D85-3050 Digital DC voltage meter With blue backlight
Simultaneously show the measured DC voltage and DC current meter on the same screen.
Road DC voltage and DC current measurements to be measured to be completely isolated within the instrument, the user needs can be measured in the external circuit according to a common ground or other form.
it A charger, inverter and other occasions suitable table, improve your product quality and selling!
Features: 1. Can directly replace older 85L17 Analog voltage meter to use.
2.After the closed-end cover design, compact, beautiful and durable.
3.A good start after the appropriate length and width of the hole, can be directly embedded installation, easy.
4. When the measured line reverse, can be displayed on the screen minus sign '-'.
1. Accuracy: 1% ± 2 words
2. Display: LCD display (visualization screen size: 43 * 25mm)
3. Measuring range:
Resolution: DC 0-10.00A (can display up to two decimal places), 0-50.0A (can display up to one decimal place)
DC voltage: DC 0-19.9V, 0-199V.
DC Current: 0-10.00A (10A or more for an externally attached shunt use) Remember measuring current 10A (0-10.00A direct) More extrinsic shunt use.
4. Power consumption: <0.5VA
5. Measurement speed: about 2 times per second
6. Power supply: AC 220V±10%
7. Dimensions: 70 (L) * 40 (W) * 39mm (depth / thickness)
8.Secure Package size: 68 (L) * 38 (W) mm (Embedded Secure Pack)
Enclosed instructions, please read carefully.
9. Note: This section must be a pure instrument supply voltage mysterious wave voltage to the power meter (square wave correction spread to burn meter!!!) If there measuring voltage between 300-600V, current terminal will be blurred is displayed, it will not take a negative electrode current blurred. Remember!!!
10. Reminder: Some customers buy more than 10A current measurements 10A or less directly to the measuring instrument, the instrument immediately burned, so the purchase of 10A or more regardless of how many A measuring shunt must be connected to use ah, remember!!!
Glossary: Measuring Accuracy of '1% + 2 word'
A: The word is a significant number of a minimum scale value. Assuming a current meter display value is 1.00A, then 1% + 2 word means: 1% + 1.00 * 0.02 = 0.03.
1. The AC220V operating voltage meter connected to the terminal 1-2
2. The measured DC voltage meter connected to terminal 5-6
3. ordered instrument measuring current is less than 10A (including 10A) is already installed in the instrument shunts, according to the following wiring diagram (Figure 1) wiring, the end of the string into the measuring circuit 3-4
4. ordered the instrument measuring current is greater than 10A is attached to the external shunt, shunt current size should be consistent and ordered instrument measuring range (example: Order 50A instrument should buy 50A / 75MV shunt) to this point Pay special attention to guests when you order! wiring according to the following wiring diagram (Figure II) wiring, the 3-4 end to the shunt voltage terminal.
Reminder: Some customers buy more than 10A current measurements 10A or less directly to the measuring instrument, the instrument immediately burned, so the purchase of 10A or more regardless of how many A measuring instrument must purchase the corresponding shunt use ah, remember!!! As will later 199.9V 100A 100A splitter, click on this link to purchase the instrument corresponding shunt
Sample specifications for the camera 0-19.99V 10.0A
Sample specifications for the camera 0-19.99V 50.0A / 75mV (75mV to