Needle Plug Wood Moisture Meter PT-90D Digital Wood Slat Wood Measuring Moisture Meter Furniture Water Meter

Needle Plug Wood Moisture Meter PT-90D Digital Wood Slat Wood Measuring Moisture Meter Furniture Water Meter
 

Product description:

Product parameters:

  • Brand: performance Thai
  • Model: needle wood moisture meter
  • Item No
  • Color Classification: PT-90D-with dry battery PT-90D-with rechargeable battery + battery charger
  • Decoration and construction content: installation works


Qinghai, Gansu, Tibet, Inner Mongolia, Xinjiang, Ningxia, Hainan These remote areas do not receive shipping outside the package, all other parts of the express mail

PT-90D Pocket Digital Wood Moisture Meter It is a version of PT series with digital display and multi-grade tree species correction, which is suitable for the rapid determination of water content of veneer and various plates.The instrument adopts microcomputer chip technology, through software automatic calibration error, improve the resolution accuracy, reading more intuitive Convenient to expand the scope of measurement, an increase of 7-speed tree species amendment.To facilitate the user to determine whether the instrument itself is in good condition, the instrument cap on the addition of test standards for the instrument with the user's custom wood tree curve and software calibration And the use of functional software upgrades. In addition to the appearance of further reasonable and beautiful. The use of more convenient, portable lighter is the characteristics of the instrument.

First, the main performance and technical indicators

1. Moisture content measurement range: 5-40%

2. Measurement resolution: 1

3. Measurement error: ± 1%

4. tree correction stalls: 7 files

5. Display: large LED digital tube display;

6. Overall dimensions: 145 × 65 × 28mm

7. Ambient temperature: - 10 ~ 40 ℃

8. Weight: 160 grams

9. Power: 6F22 9V battery 1 section.

Second, the operating method

1, pre-measurement check:

Unplug the instrument cap and touch the probe to the two contacts on the cap. Press the test switch.

2, tree stalls set method:

According to the measured wood, according to the recommended table to find the setting of the stalls.First hold down the tree species setting button, and then press the test switch at this time will display the current tree species gear settings and the lower right there is a decimal point , Press the tree species setting button to change the position to the desired position, release the two buttons, set up after the boot will keep the settings of the gear until the change again Note: Set the test button do not let go The factory default setting is 5, and the current setting is checked by pressing the tree setting button.

3, measurement:

Press the test switch, LED digital tube indicates the average absolute moisture content of the specimen, the measured value< 3时显示3. 鬆开测试开关, 电源自动关闭.

Third, pay attention to matters

1. This instrument is recommended for wood species correction gears in the table below.

2. Determination of stalls without tree species:

First, take a few pieces of wood as much as possible to maintain the equilibrium moisture content of the tree species to be determined stalls, with the instrument were measured in the tree species set at 1 to 7 when the instructions of the value, respectively, record the average recorded.Then the sample into the oven , And the moisture content was determined by the method of drying, and then compared with the average of 7 groups, the correct value of the tree was the most suitable for correcting the stall, and then it could be used as reference for setting.

If it is not possible to perform the above test, it is recommended to set the corrective gear position for the fifth gear, but the measurement error should be noted.

3. Within six months from the date of shipment, in case of product quality problems (not caused by man-made damage), free warranty, replacement within one month.Tester test cycle is generally one year.

Fourth, tree species correction gear schedule Species

species

Stalls

species

Stalls

species

Stalls

Walnut

3

Pick up the wood

7

A will East

7

Liu An

5

oak

5

clone

7

Ash

5

Balsa wood

5

American white pine

5

sandalwood

5

Ba Lao

6

elm

5

birch

5

Oak

5

Pineapple grid

6

Sugi

5

Kangbasi

6

Red sandalwood

5

Basswood

7

poplar

3

Teak

6

Maple wood

5

white wax

5

Iron wood

5

Larch

5

White fir

5

Indian eggplant

7

Beilian

6

Beech

5

Yunnan Shi Zi

5

Hemlock

5

Pinus massoniana

7

Red bakelite

7

Boat-shaped wood

4

Bincardo

6

Cloud incense

6

According to Tony

6

Olive wood

5

The new HK-90 Products:

Moisture 10 below, resolution 0.1%

HK-90Wood moisture meter for wood fiber material, moisture content of 3%—40%Of the objects, such as bamboo products, wood, veneer, sheet metal and other types of wood moisture content of the rapid determination.

The product uses single chip computer chip technology, a key measurement without stalls, the internal software automatically calibrates all kinds of errors. Cap on the addition of a test standard.

Resolution of 10 the following is 0.1%, better than the average product.

Display: LED digital display.
Measuring range: 6.0 ~ 55%
Resolution: 10 or less 0.1% 10 or more 1%
Power: 1 9V battery.
Dimensions: 128 × 61 × 24 (mm)
Weight: 150 grams