|[Electronic and Electrical] - [Instrumentation]|
Laboratory High-speed Disperser | Disperser Mixer | Mixer | Small Disperser | Electric Mixer
Laboratory High Speed Dispersing Machine This equipment combines the dispersing function and the stirring function into one body, and disperses and homogenizes the two processes by one machine and one container. Efficiency: According to the development trend of international advanced dispersing equipment, It is widely used in the dispersing and mixing of materials in factories, scientific research institutions, universities and medical units, and so on.
Second, the working principle
This equipment adopts the electronic constant force speed regulating circuit, the number shows the rotating speed of the shaft directly, and is equipped with the dispersing impeller and the sanding disc, can adapt to the different experiment needs of the laboratory, and can display the shaft speed and the material viscosity and the chemical reaction rate The relationship between the large-scale production for the right to provide process data.
The dispersing head of the machine is driven by the high speed of the motor to produce high speed of tangential rotation under the action of huge centrifugal force to produce powerful hydraulic shearing and high frequency mechanical effect, so that the fluid material can bear thousands of times per minute Of the shear and high-frequency mechanical effects, so as to achieve the efficiency of mixing, dispersion, homogeneous effect.High-speed dispersion grinding machine FS-400D, 10000D
Dispersion, grinding, mixer JFS-550
The dispersing head of the machine is driven by the high speed of the motor to produce high speed of tangential rotation under the action of huge centrifugal force to produce powerful hydraulic shearing and high frequency mechanical effect, so that the fluid material can bear thousands of times per minute Of the shear and high-frequency mechanical effects, so as to achieve the efficiency of mixing, dispersion, homogeneous effect.
FS-400D / 1000D JFS-550
Third, the main structure
This machine mainly consists of the following components:
1, the motor
2, intelligent motor speed controller
3, stainless steel cylinder
4, lifting bracket.
5, scattered, sanded head
Fourth, the installation
1, the two holders on the holder, the stainless steel cylinder fixed, cylinder cover hole with the motor shaft coincide.
2. Connect the motor to the 5-pin air connector on the governor (note the notch direction)
3, connected to the ground
Fifth, use and maintenance
1, the use of the selected grinding wheel or scattered impeller and shaft fixed.
2, adjust the shaft and the high position of the capacity, locking motor seat and container, put the material and cover the container cover.
3, turn on the power, turn on the switch, wait for the display to reset to zero, then press the touch button to increase or decrease the required speed.
4, the motor for the series motor, rotating brush when the spark, explosion-proof workshop should not be used.
5, the speed is greater than 4000r / min not open machine.
6, when the motor brush is less than 10mm, should be replaced.
Intelligent motor speed control system for the use of instructions
Intelligent motor speed controller Intelligent high-speed motor control device adopts intelligent control technology to achieve stepless speed regulation of series motor.Applying digital PID technology, the control precision is high, the system structure is simple, stable and reliable.