| This product is an ultra-small size, portable, hand-held global positioning system mini-receiver, with latitude and longitude coordinates and guidance, global time zone, distance, mileage, speed and other data collection calculation display and other functions! The highly sensitive personal guidance function allows the user to return to the original starting point at any desired time or to return to the preset target point. During the guiding process, the product provides the current geographical coordinates, target direction and distance, Time, speed and other clear travel data, is a good personal adventure travel companion. |
The GPS find way Po Product Description:
1. Product main function
- Globe to Light Simple to operate GPS!
- Store up to 16 points of interest!
- Return to the starting or guiding destination!
- real-time latitude and longitude coordinates!
- Travel distance time!
- Travel speed and altitude!
- Satellite time!
Second, the technical indicators
Receiver: L1 type, C / A code, capture channel: 51, tracking channel: 14,
The maximum update frequency: 10hz (0.1 seconds),
Display image rate: 128 * 64,
Backlight type: blue
Appearance size: 65 * 52 * 21mm
Weight: 39.6g With battery,
Keys: 3 keys,
Accuracy: positioning, 10 m (support differential correction system area 2 m), speed, 0.1 m per second,
Initial positioning time: hot start about 5 seconds, warm start about 40 seconds, cold start about 2 minutes,
Sensitivity: -161dbm tracking, -157dbm re-capture, -148dbm capture
Data protocol: NMEA-0183 v3.01
Power supply voltage: USB DC 5V / 3.7V390 mA Built-in lithium battery
Operation time: about 6 hours
Power consumption: Captures approximately 70 mA and continuously tracks about 30 mA
Ambient temperature: working -20 degrees to +55 degrees, storage -30 degrees to +55 degrees
Ambient humidity: up to 80% non-condensing humidity
Preparation for use
1. Open the package, take out the product and all accessories, including: a field guide, USB charger, a manual.
2. This product is built-in lithium battery, please go out in the fully charged, the charging process, the blue backlight is bright, fully charged, the blue front light goes out, the power is completely exhausted, about 4 hours Electricity.
3. Power on, the upper right corner of the battery icon shows the battery capacity status, space, please charge in time.
4. Press and hold the Enter key for three seconds to turn on the power on the screen, and then display the Power On icon: Mini GPS, then enter the main page and press and hold the Enter key for 3 seconds in any mode or page. Shutdown.
4. Key operation instructions
1. Confirm the key
* Shutdown, long press the Enter key three seconds to boot, any mode or page, press the Enter key for three seconds to shut down.
* The machine opens the page 1, presses the confirmation key shortly, may switch 16 points of interest backward.
* Machine open page 2, press the Enter key for the start mileage and time calculation.
* The machine opens page 6, press the enter key to enter the sub-page Back Light, press the enter key again to enter the sub-page, the selection item will be highlighted, and then press OK again Key to confirm the selection, return to the previous level, without any operation, 5 seconds after the return to the main page.
* Point of interest refers to the map marked out with latitude and longitude information, can be used to find and calculate the navigation landmarks, buildings.
2. Press the UP ARROW key
* Six kinds of pages are switched down
* To display the page 6 Settings, press the Enter key to enter the sub-page, and then press the Enter key once to enter the setting selection item (ie, enter the sub-sub-page), press the Up key to change the parameter setting
3. Press the DOWN ARROW key
* Operation is the same as the Up key.
5. Navigate to the action page
Users need to use the director to guide all the relevant data displayed in the main page, to browse these pages in the product to grab the satellite signal and in place, repeat the short press the UP key or the DOWN key to cycle from a page cut Find another page.
Page 1 (Home page): Displays the satellite signal reception intensity, remaining battery capacity, point-of-interest recording order and time, and the distance and direction from the current position.
Page 2 (travel information): shows the travel time has been used and the mileage information, short press the Enter key, the upper left corner of the signal next to a small villain icon and start recording your trip mileage and time information, Confirm button, the villain icon disappears, record stop.
Page 3 (latitude and longitude coordinates): shows the current location of geographic latitude and longitude coordinate information
Page 4 (Speed & Altitude): Displays the current speed of travel and relative altitude
Page 5 (Satellite Time): Displays the exact real-time satellite synchronization time
Page 6 (Setup Page): Provides settings for the backlight to show time, time zone, and point of interest deletion.
Six points of interest satellite positioning
1. In the outdoor open sky around the elevation of 15 degrees in the absence of building environment, the front handheld guide to open the machine, enter the page 1 (main page), the upper left corner signal four steps show the signal strength level, There are no signal ladder to the search of a satellite. 1 column that search and receive three satellite signals people, two that four satellites, three said there are five satellites, four that six or more satellites. Or more of the bar signal can only be positioned, and the signal is more accurate positioning of super-strange environment and long time not to use the case of cold start, search for star signal time is about 2 minutes, the position deviation is not, Shutdown time is not long, such as 2 hours to start again, about 40 seconds, a short shutdown or loss of signal, start again for the hot start takes about 1-2 seconds.
2. When the intensity of the signal bar is two or more, press the enter key and the up or down key simultaneously for three seconds to lock the current position as the first light point and the left side to display the information point order (1) , The right shows the point of interest lock time for the user can use the arrow in the lower left corner of the icon in the process of moving the direction and distance to return to the set point of interest.
3. Press the Enter key to find the next point of interest, press the Enter key and lock the current position as the second point of interest, in order to determine the 16 points of interest. Each point of interest are set Date and time, the user can set their own time to confirm their own set of points of interest.
4. Press the up or down arrow key for three seconds to enter the latitude and longitude coordinates change page, the first longitude and longitude values highlighted, the cycle of short press the up or down button to select the location to change the cycle short press the Enter key to change the value 1-9. The last position N stands for north latitude, S stands for south latitude, E stands for east longitude and W stands for west longitude. You can find the latitude and longitude coordinates of target place by Google map in advance and input the machine according to this operation. UP or DOWN button for three seconds to save the settings and return to the main page, if no operation, 10 seconds after the return to the main page.
1. Go to 6 Setting and press Enter to enter the Back Light Time setting page. Press the Up or Down keys repeatedly to enter the Time Zone, Measure Unit, , Clear POI (Clear POI), Cold Start (Reset Default), and finally return to the Setting page. If nothing happens, the main page returns after 5 seconds.
2. After entering the Back Light time setting page, press the Enter key to enter the backlight time selection page. Press the Up key or the Down button briefly, the time will be highlighted: 5 (s), 10 (s), 30 seconds, 60 seconds, 30 seconds, 60 seconds, Infinite represents the backlight continuous display time 5 seconds, 10 seconds, 30 seconds, 60 seconds, press OK key to confirm the final selection, the time is displayed normally.
3. After entering the Time Zone setting page, press the Enter key to enter the time zone selection screen. Press the Up or Down key briefly to display the time difference: -12, ~, +13 respectively. Greenwich Mean Time Difference Choose the time difference between the local time zone and Greenwich Mean Time, press the Enter key to make the final selection, and the time difference value will be displayed normally.
4. After entering the Measure Unit setting page, press the Enter key to enter the measurement unit selection page. Press the Up or Down key briefly to display the measurement unit: km mile represents the kilometers and miles respectively. Select the required measurement Unit, short press the Enter key to make the final selection OK, the unit of measurement is displayed normally.
5, enter the Clear POI (Clear POI) page, short press the Enter key to enter the point of interest selection page, short press the up or down button, select will highlight: YES, NO, respectively, on behalf of yes and no. Need to clear all the points of interest, short press OK to select YES, all points of interest will be cleared, YES normal display.
6, into the Cold Start (cold start) page, press the Enter key to enter the cold start selection page, short press the up or down button, select highlight: YES / NO respectively represent and not, in a strange environment and If it is not used for a long period of time, please select Yes, this will help to clear the old reserved satellite information, improve the speed of re-search, press YES key to select YES, the product will automatically shut down and restart, the old Satellite-related information is cleared.
7, into the Reset Default (reset default) page, press the Enter key to enter the factory default default settings page, short press the up or down button, select highlight: YES / NO respectively represent yes and no, select whether or not Press the Enter key to select YES. All settings will be reset to their original factory default settings.
1. In the same point of interest page, the second lock POI operation will cover the first message, if you want to keep the original point of interest, the article will switch to the next point of interest and then the next POI positioning operation.
2. The unit can only calculate and provide the correct direction indication information when you keep moving at a certain speed.
3. To conserve power, turn off the unit after confirming the orientation and direction of travel, and then turn the unit on again after a certain period of time and distance have passed to determine the orientation and direction again.