|[Electronic and Electrical] - [Instrumentation]|
Solar energy 12V200AH maintenance-free battery | Solar Street Light Battery 12v lead-acid battery
Rated voltage: 12V
Rated capacity: 200AH
Dimensions: Length 522mm Width 240mm Height 218mm Total height 240mm
Seller Reminder: OUR WEIGHT 10KG above the baby or fragile goods, the default mode of transport are freight, need to pick up!
As the product batch is not the same, slightly different appearance, delivery time to warehouse existing products shall prevail.
Battery production process and the use of special structural design, reliable and stable safety valve, place no leakage, high oxygen recombination efficiency, so that the electrolyte will not be lost in the whole life of the battery without the need to replace the electrolyte.
1) long life: the use of lead-calcium alloy plate to increase the battery float life, high-current discharge performance, and strong recovery.
1) Suitable for solar street lights Solar hybrid street lights Solar system UPS power system Power system alarm system Fire equipment
2) telecommunications, mobile, network, railway, airport and other communications, signal system backup power;
3) hydroelectric power storage, power system, nuclear power station standby power;
4) ships, marine and other backup power;
5) petrochemical system standby power supply;
6) Marine Signals and Aids to Navigation.
1) Installation, use and maintenance process, the battery shall not be short-circuit, not upside down, should use insulating tools, and equipped with insulated gloves to prevent electric shock and cause a short circuit.
2) When the battery is abnormal, it is forbidden to dismantle and repair it.
3) The product should be charged in the charging system, charging system, the DC output voltage fluctuations should not be greater than -1%.
4) Prohibit the use of gasoline, thinner and other organic solvents to clean the battery, otherwise it will damage the battery shell.
5) Long time overcharge (overcharge) will shorten the battery life; long time too low charging (not enough) will affect the work of the load or cause voltage anomalies. (Red), negative (black) charging clip corresponding to clip the battery, do not reverse the charge after the first turn off the power switch, then take the battery clip.