Manual fire alarm button J-SAP-JBF-301 / P Manual button

Manual fire alarm button J-SAP-JBF-301 / P Manual button
 

Product description:

Product parameters:

  • Brand: Zhejiang
  • Model: J-SAP-JBF-301 / P


-

1, J-SAP-M-JBF-101F-N manual fire alarm button Product Features:

1, J-SAP-M-JBF-101F-N manual fire alarm button built-in microprocessor;

2, the use of SMT surface mount technology;

3, manually push the spring button, the internal switch action, the alarm signal to the controller, using special tools for reset;

4, a group of passive contact output;

5, the two bus, no polarity. Low power consumption, the farthest transmission distance 1500m. Wire cross-sectional area of ​​1.0-1.5mm2, no special requirements on the wire. Construction is simple, low cost;

6, plug-in structure, the same as the first installation of the detector base installed in the wall, wiring, commissioning before the project before the report parts into the base. Easy to construction and maintenance;

7, set a dual-lamp display, the alarm light to confirm when the light.

Second, J-SAP-M-JBF-101F-N manual fire alarm button Main technical parameters:



1, the working voltage: DC19-24V controller, modulation type















2, wire: two bus, no polarity

3, the working temperature: -10 ... +50 ℃

4, storage temperature: -20 ... +50 ℃

5, the use of the environment: indoor type

6, relative humidity: ≤ 95% (40 ± 2 ℃)

7, the monitoring current: ≤ 0.3mA (24V)

8, the alarm current: ≤ 3mA (24V)

9, encoding: electronic encoder coding

10, to confirm the light: monitoring state instantaneous micro-bright, alarm Chang Liang (red)

11, Dimensions: 86.5mm long × 86.5mm wide × 42mm high

















-

-