DC 12-24V Wireless LED Controller RF Touch Panel LED Dimmer RGB Remote Controller for RGB LED STRIP LIGHT
Technical parameters: Working temperature -20~60 degreeee Input voltage 12V~24V Output 3 channels Connecting mode Common anode Static power consumption ( 0.5W Output current 6A (each channel) Output power 12V: (216W 24V: (432W Frequency of RF remote controller 433.92MHz
The faction of each button as follows Name of key Instruction Remarks On/ Mode ON in any time, when static under 20seconds, the key will be automatically go to sleep, then it's as awakening key 22modes in total OFF Off in any time Color ring Touch any color you wish In any mode, touching the Color ring will be into ring mode Color/ Speed+ The color will be dark, Speed will be up, when you touch the key in any state Color darker for ring mode, speed up for dynamic modes (8 grades) Color/ Speed- The color will be dim, Speed will be down, when you touch the key in any state Color dimmer for ring mode, speed down for dynamic modes (8 grades) Brightness+ The brightness will be brighten when you touch the key in any state Brightness for dynamic modes and static modes, but ring mode and color light crossfade (8grades) Brightness- The brightness will be dim, when you touch the key in any state
To match the remote control to the receiver (you do not need to do this when first out the box) . Press 'brightness-' Key once when first switched on within 3 seconds. This light will blink 3 times to indicate that the remote control is matched.
Press 'brightness+' Key once when first switched on within 3 seconds, the light will blink 6 times if clearing is successful.
1. Supply voltage of this product is DC 12V-24V
2. Lead wire should be connected correctly according to connecting chart.
3. Warranty of this product is one year, the product failure occurred due to human factors is not in free warranty.
4. Before connecting the electricity, ensure no short circuit. The installation location ensure no damp, direct sunlight and higher temperature etc.