DV500 Loop Recording Bluetooth Rearview Mirror Rearview Mirror Driving Recorder Tachograph Car DVR HD 1080P
Video resolution: (1920x1080) (1440x1080) (1280x720) the default settings
Language settings: English (default) / Russian / Japanese / Simplified Chinese / Traditional Chinese / French / Spanish / Italian / Portuguese / Turkish / Greek / German
Formatting: Memory / TF card (choose one formatting)
Frame rate: 15FPS/ 30FPS (the default setting)
Compression format: H. 264
Light source frequency: 50Hz (default setting) / 60Hz
Date / time: at standby mode, press twice menu keys (4) to enter the setup interface, press the down key to setup, press confirm key to save.
Recording time: select Off / 2 minutes (default) / 5 minutes / 15 minutes. When off is selected, TF card is full and will stop recording, and will not loop recording
Date label: OFF / ON (default setting) . When you select off, videos do not have time to show.
Default settings: cancel / confirm OK. When select OK, DVR will restore to factory settings.
Motion Detection: Off (default setting) / On
Voice Recording: Off / On (default)
Version: Displays the system version
Night vision: When the recorder starts, long press the switch key to switching night vision or day vision.
Mode key function: When the recorder starts, long press mode key , switch the LED and button lights off.
G-sensor - Collision sensing capabilities:
After the start of the recorder, in the recording state, when vehicle collision occurs, the machine will automatically start the collision sense, Preserved and accidents for some important video file (this file will not be overwritten or deleted) . Settings is ====) G-sensor====) 2G/ 4G/ 6G/ 8G (2G most sensitive)
A Bluetooth feature: on and off: check Menu, you can set the Bluetooth function on and off.
If the Bluetooth is turned on, long press the Bluetooth key for 2 seconds and turn off the Bluetooth; again to turn on Bluetooth. interface prompts when Bluetooth is turned on or standby; or the interface prompts. the bluetooth was shut down.
1. insert TF card first before video.
2. This recording enable loop recording, when the storage is full, DVR will automatically recording new content and overwrite the old file. Overwrite the old file, DVR will have a blind spot about 3 seconds, that means DVR will stop recording content within about 3 seconds. (Using the attached USB car charge for DVR, car charger is a adapter which 12V/ 24V transfer to 5V, if adapter output voltage is greater than 5V, DVR damaged.)
1*Car dvr without card included