4CH Professional SD Card Mobile DVR

4CH Professional SD Card Mobile DVR

Product description:

1. General Introduction

The SDVR series mobile digital video recorder is a compact, full-featured recording system that uses a SD card as a storage device. The recorder unit and associated accessories are specifically designed for operation in a mobile environment.
The SDVR system, used in conjunction with the cameras, records up to four channels of full-motion video and audio data to a Class 4 (minimum) SD card. The firmware-driven menu system provides a simple method for configuring the unit's operation as well as searching for and viewing previously recorded AV records.

Regulatory Compliance

The SDVR complies with CE and Part 15 of the FCC interference limits for Class B digital devices For Home or Office Use. These limits are designed to provide reasonable protection against harmful interference. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Description
The SDVR unit consists of the following major components:
Standard Components and Features
Extruded aluminum case (the case is anodized in cobalt blue) .
Front and rear panels.
Mother Board.
Power, AV input and output cables.
Power input 2 amp fuses (2) .
Tamper proof and lockable security enclosure.
Panel lock with (2) keys for locking the security enclosure.
Wireless remote controller.
Removable SD card, Class 4, minimum (customer supplied) .
Optional Components and Features
GPS speed and location data overlay.
Wired remote cable for non line-of-sight DVR operations.
Extension cable for easy connection and installation.
Product Main Features
Embedded operating system, assuring reliability and system integrity.
Records up to four channels of full-motion color video with corresponding audio tracks.
H. 264 High Profile video compression.
Total Record resource up to 100/120 D1 frame/ second.
Lockable security enclosure.
Front panel USB2 port for recording to a flash card as an optional storage device.
Ignition sense that provides DVR power-on in recording mode when the bus is started.
Power-off delay record when the bus is shut-down with operator-selected delay times.
Video And Audio
H. 264 High Profile video compression, real time recording (25 fps (PAL) / 30 fps (NTSC) for each channel. Frame rate adjustable for each channel.
Audio compression: G. 711 codec. This codec offers high compression with high quality audio.
D1 resolution for each channel, which means each channel support 720x576 (PAL) /720x480 (NTSC) .
Support 4 channel real time D1 video and 4 channel audio recording.
Local video and audio real time playback.
GPS Time Synchronization & Time Zone
Synchronize the DVR system time with GPS automatically
Support All Time Zones Worldwide
Support DST (Daylight Saving Time)
Power Management
Reliable power management, wide voltage: +8VDC~+40VDC; The power input is protected against short positive transient (1500 watts peak pulse power capability with a 10x1000 us waveform) ; The power input is protected against negative voltage. Applicable for vehicles with +12V or +24V battery.
The recorder provides each camera with stable +12V DC power; DVR can detect the short cut on power circuit.

Can use ignition to control the power.
DVR can monitor battery voltage after Ignition off, and auto into sleep mode when voltage is bellow specified level.
Recording mode
Continuous record.
Support schedule recording.
Support alarm recording.
Support motion detection recording.
Support 2 recording mode, composite mode and separate mode.
Speed and Vehicle status recording
Record vehicle speed and car id with audio and video.
Support 5 sensors, can be connected to speed, ignition, brake, return, right turn, left turn light etc.
Over-speed alarm.
Specified screen can be full screen displayed when return sensor trigged.
SD card plug and play
Support SDHC card within 32GByte.
Support SDXC card more than 64GByte (Maxim 2048GByte)
Support plug and play for SD card when not recording and playing.
Note: If you remove the SD card while recording or playing, it might cause the damage of the file on SD card. While recording or playing, the yellow light on the front panel will be on. So please stop recording or playing until the yellow light is off if you need to remove the SD card.
Multiple player supported
You may use manufacturer's PC Playback Software or any of the following third party media player to play back the record file.

VLC media player (version1.0.0 or above) ;
Storm player (Version 2009 or above) ;
Winamp (Version 5.531 or above) .
2. Product Figures
2.1 Front Panel
1: SD Card Slot
2: Status Lights (Power, Run, Alarm, SD Card, Record Status)
3: Stop Button: For stop recording.
4: LANC Port: For connection to an Event Cable or a wired remote IR sensor harness (option)
5: Infra-Red receiver window.
6: USB Port: Can be used as a secondary recording device, such as a flash memory card. This port cannot be used as a direct access link to a PC, however.
7: Network Port (RJ45) .
Get to know the status of DVR system by the indication of LED lights:
1. PWR (Green)
2. RUN (Green)
Status/ Description
Always On
SDVR is on & running
Blinking with RUN by turns
Blinking with PWR by turns
Ignition is not enabled and SDVR is OFF.
Blinking together with RUN
Blinking together with PWR
Ignition sense is not enabled & SDVR is running. Unit will turn OFF when 'Delay Time' setting is reached.
Blinking every 3 seconds
Select PWR on the remote control to restart.