|IP Camera Server with 4 Wireless Cameras|
IP Camera Server:
Compression Standard: H. 264
PAL: D1 (704x576) / CIF (352x288) / QCIF (176x144)
NTSC: VGA (640x480) / QVGA (320x240) / QQVGA (160x120)
Video Frame Rate: PAL: 25 frame/ s, NTSC: 30frame/ s
Power Consumption: < 5W
Ethernet: Yes, Wired RJ-45
Video: Wireless (2.4GHz) 4 Channel
Video: Wired 3 Channel
Audio: Wired 3 Channel Single AV, Mono
TV System: PAL/ NTSC
Resolution: PAL: 628 (H) x 582 (V) , NTSC: 510 (H) x 492 (V)
Image Device: 1/3 Inch Omn Vision CMOS
Transmission Frequency CH 1: 2414MHz CH 2: 2432MHz CH 3: 2450MHz CH 4: 2468MHz
Horizontal Definition: 380TV Line
Minimum Illumination: 0Lux
Nightvision: Yes - IR, Automatic-switch
Transmission Signal: Audio and Video
Transmission Distance: In Open Field 300-500m. Indoors: ~100M
Scanning Frequency (H) : 15.625KHz 15.734KHz
Scanning Frequency (V) : 50Hz 60Hz
Backlight Compensation: Auto
Electronic Shutter: 1/50 (1/60) -1/100000sec
White Balance Auto
S/ N Ratio ) 48db
Gamma Correction ) 0.45
Audio/ Mic connection
Power Adapter DC12V/ 1A
Night vision distance of the infrared camera is up to 15m
View by IE browser, no special software required
Remote recording and snapshot control via Internet
Supports motion detection snapshots + alarm settings, which allow captured images to be sent out through e-mail
4x Wireless Cameras
4x Mounting Brackets + Hardware
5x Power Adapters (4 for wireless camera, 1 for IP camera server)
5x Free Travel Adapter (for UK, AU, NA, SA customers)
CD with Manual and Drivers
FAQ - Frequently Asked Questions
Why can't I view the control page from my FireFox browser?
For best results, please use Internet Explorer (with Active X enabled) or the provided evaluation software.
Do the four wireless cameras have audio?
The camera itself cannot record audio, but you can connect an external mic to each of them for audio recording.
Do I have to turn night vision on manually?
No, the wireless cameras each have a light sensor that detects light levels and switches to nightvision/ IR mode automatically!
The photos show a AV out on the IP Camera Server, but you have not listed that functionality on your product description.
Can I connect the IP Camera Server to a monitor through AV out?
The IP Camera Server is sold without AV out connectivity.