|icloud Camera wifi ip camera Cube mini ip camera 720P, CCTV cameras , HD camea|
C100 HD iCloud Camera
l Suitable for house keeping, baby sitting, elder caring, pet caring, etc.
l Suitable for small business, office and other indoor places where high definition image is required.
l Suitable for warehouse, accounting office, computer center, garage and other small-scale places.
l Specialized Hi3518E SOC solution applied to ensure high product performance.
l P2P technique and no need router and network setup while watching video on smart-phone or PC
l High-performance SOC, H. 264 base line, Main profile encoding applied to ensure clear and smooth internet video playing.
100Megapixels 1/4'CMOS multi-functional icloud camera
1/4 Progressive Scan CMOS
f=3.6, F=2.0, Horizontal angle of view: 70 degrees (2.8mm, 4.0mm, 8mm optional)
Day and night switch mode
ICR infrared filter functional within 10 meters distance.
Video compression standard
Video compression type
H. 264/ MJPEG
H. 264 encoding type
BaseLine Profile/ Main Profile
Output bit rate
Audio compression standard
G. 711/ G. 726
Ethernet protocol TCP/ IP, HTTP, TCP, ICMP, UDP, ARP , IGMP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPNP, RTSP
1 pc RJ45 10M/ 100M self-adopt Ethernet
Micro SD, Max support 32G
Wifi802.11 b/ g/ n
2.4 GHz ~ 2.4835 GHz
64/128-bit WEP, WPA/ WPA2, WPA-PSK/ WPA2-PSK, WPS
Outdoor: 50 meters, indoor: 15 meters (sensitive to environmental change)
Smartphone system requirement
Need system version above android 2.2.2 and IOS 4.0
PC system requirement
Microsoft WinXP, Win7, IE, FireFox, Google Chorme
Temperature and humidity
-10C~40Chumidity less than 95% (No condensation)
2-4W (4W for running all functions)
FCC CE RoHS
80 x 105 x 125MM (LxWxH)
GW: 400g/ PCS (Note: Refer to real product)
112 x 97 x 162MM (LxWxH)
579 x 339 x 215MM (LxWxH) ; 20PCS/ package
iCloudLive Camera Quick Installation Guide
iCloud camera 1pc
5V Power Adapter 1pc
Ethernet Cable 1pc
Expansion screws 2pcs
Quick Installation Guide 1pc
1. Appearance introduction
CDS, Lens, IR LED, Microphone, LAN, Speake, RST/ WPS, WiFi indicator, System indicator, LAN indicator
LAN/ 10M/ 100M LAN port
RST/ WPS Press 10 seconds to restore factory default settings/ press 5 seconds to enter WPS mode (LED light flashes, 'Success' is on, 'Failure' is off)
WiFi indicator WiFi operation mode: Red LED is on
LAN indicator Network operation mode: Green LED is on
System indicator Normal work mode: Blue LED is flash
2. Hardware installation
To mount the icloud camera to a wall, unscrew the base of the camera.
With the included screws and anchors, fasten the mounting bracket on to the wall. Then, reattached the base cover and screw the stand back on to the mounting bracket.
3. Hardware connection
Plug in power adaptor, then connect Camera and the LAN Port of Router with Ethernet cable. (Note: Please make sure DHCP is on in your router)
4. Smartphone application
4.1. Search the App Store, Google Play etc. to download and install iCloudLive.
4.2 When iCloudLive app is installed successfully, the following icon will display.
4.3 Run App, click +, select LAN Addition (Recommendation) - ) search Camera - ) select ID number, enter the password (the Default password: admin) - ) then you can enjoy my camera.
Remark: you can also use 'Scan QRCode Addition' or 'Manual input ID' (QRCode and ID number on body of the camera) .
4.4 Click 6DDK}G3JPQE (M0PDQW~42`7 to enter parameter setting such as modify password, video quality setting, image flip, environment model, WiFi setting, motion detection and recording setting, etc.
4.5 WiFi Setting: Enter WiFi Setting under Parameter Setting and select the correct WiFi network, input the password and click 'Join' or 'Ok'. (After WiFi setting, you can unplug the network cable and system will automatically switch to WiFi mode 50 seconds) .
5. PC application
5.1. Download 'iCloudLive for PC' from cloud driver or official websites (pls see the last page 'Environmental Protection Download') .
5.2. Install iCloudLive for PC and run it.
5.3. Login iCloudLive for PC and click J (0) ) ~78EYI~XWNEYD) `WA2 to add camera with below interface. Click 'search' button, all camera IDs in the same LAN will show (Remark: you can also manually input ID number which can be found on the sticker of the camera) , finally enter the password (the default password: admin) and click 'save', and double-click the camera ID in the device list to start your camera.
Q1: Why system prompted that camera is off line after camera ID added?
A: Please click software 'reconnect', or check the camera power supply and if network connection is normal.
Q2: Why sometimes there is time-lag when watching the video?
A: , Please check your network connection or set up video quality to 'low' pattern under advanced setting.
Q3: What can I do if I forgot the camera password?
Find the 'WPS/ RST' button on the unit, press it at least 10 seconds while charging, then release and wait for 30 seconds, system will automatically restore factory default username / password: admin.
Environmental Protection Download
Scan below QR Code with your smartphone to download data or input the website address in your computer browser and download data.