High Efficiency Water Turbine\ Inclined-jet Turbine for Hydroelectric Power Plant

High Efficiency Water Turbine\ Inclined-jet Turbine for Hydroelectric Power Plant

Product description:

Introduction of Inclined-jet turbine

Inclined-jet turbine: The pressure energy of water flow is changed to velocity energy by the nozzle, since leaving the nozzle, the water flow is not in a closed system, but forms the free jet in the spiral casing filled with atmosphere, and at the same time there are 3-4 buckets receiving the free jet from the same nozzle with unequal-sized discharge. There was a fixed angle (usually take 22.5 degree) between the jet center of nozzle exit and the inlet water plane of runner.

Characteristics and application scope of Inclined-jet turbine:

Application scope of heads: 15m~300m
Applicable discharges: Q=0.089~8.30m3/ s
Runner diameters: 0.05m ~ 5m
Installable capacity: 500KW ~ 6000KW
Specific ratio speed: 18 ~ 45

We also providing different kinds of water turbine generator:

1. Francis Turbine

2. Pelton Turbine
3. Inclined-jet water turbine
4. Cross flow water turbine
5. Tubular water turbine

Company Introduction

Found in 1958, our factory in hydropower products has continuously been one of the national strategic turbine manufacturers in China since year 1995. It has now 246000 square meters ground area and 68000 square meters office building area. With over 500 workers and over 200 technicians and engineers, ADDNEW's invested factory is certificated by ISO9000-2000 and CE.

From the start of 2005 to the end of 2012, ADDNEW and our factory in Hunan, China have designed, manufactured and installed successfully over 170 small Hydroelectric Power Stations in Albania, Chili, Congo, India, Lithuania, Kazakhstan, Vietnam, Zambia and other overseas markets. The equipments adopted for those hydropower stations are unit-capacity from 800KW to 100MW and the total power generating capacities of each station ranging from 1600KW-200MW. All the completed stations are now maintaining their peak performance after their installations.

Why Choose Us (Addnew)

1. We can provide the complete equipment, including: Water Turbine, Generators, Inlet Valve, Governor, Computer Control Panel, and other ancillary equipment.

2. Our production ability and quality of Francis Turbine runner ranked first in China among all the small and medium sized enterprises.

3. We have Microcomputer digital speed governor.

4. Our Low voltage (400V) Generator can be controlled by microcomputer monitor system. ( A key to boot, and a key off)

5. Our Microcomputer XCR Excitation Panel is automatic controlled and can monitor temperature, rotate speed, water level, electric current, and voltage automatically. If the Microcomputer XCR Excitation Panel broke down, you can Manual control backup, then, the machine can run normally before the Microcomputer XCR Excitation Panel repaired.

How to inquire our product?

1. please send us the detailed parameters of the HPP

A Water head- m

B Flow- m3/ s
C Installed capacity- KW
D Frequency- 50HZ or 60HZ
E Generator excitation- static SCR excitation or brushless excitation
Those parameters will decide which type of turbine and generator best satisfy your water condition.
2. Tell us your requirements of the water turbine generator unit.
A Does special material required for the equipments?
B Does the unit controlled manually or by computer?
C What should be quoted in the proposal?
Mechanical and Electrical part? Swithyard?

Addnew Technologies Limited
Contact person: Cherie Xie
Mobile: +86-15874968744
If you have any questions, Please feel free to contact us!