Abrasive bulk density tester, GB / T3603 bulk density tester

Abrasive bulk density tester, GB / T3603 bulk density tester
 

Product description:

Bulk density analyzer angle of repose tester powder metallurgy densitometer tap density tester plastic particles densitometer powder tap density meter Determination of apparent density measuring apparent density Apparent density test Apparent density tester ceramic density battery tap density powder tap density meter resistivity conductive carbon black powder true density meter tap density gauge powder metallurgy powder rheometer Density Tester true proportion of powder tester







Bulk density analyzer angle of repose tester powder metallurgy densitometer tap density tester plastic particles densitometer powder tap density meter Determination of apparent density measuring apparent density Apparent density test Apparent density tester ceramic density battery tap density powder tap density meter resistivity conductive carbon black powder true density meter tap density gauge powder metallurgy powder rheometer Density Tester true proportion of powder tester


FT-106C ordinary abrasive bulk density tester

Abrasive bulk density of particulate media in the case of the Department of Natural accumulation, contained in the unit volume of air quality abrasives, in units of g / cm 3; and standard of DMP-1 type bulk density meter for the same product

First, according to GB / T3603-83 ordinary abrasive bulk density measurement method require the production, for the determination of corundum and silicon carbide No. 8 to 240 grit abrasive bulk density.

Second, the technical requirements

1. Funnel Material: brass or stainless steel; cone height: 82 mm; tapered portion angle: 60 ~ 63 °;

2. funnel neck inner diameter: 12.7 ± 0.05 mm; funnel neck length: 12.70.05 mm.

3. Process requirements: smooth surface, no machining marks.

The locking means is a funnel of 35 mm diameter rubber balls. With two springs fixed to the lower end of the funnel neck. Funnel neck to the lower end of the distance measuring cylinder port is 115 ± 2 mm.

5. Measuring tube material: brass; inner diameter: 39 ± 0.1 mm; internal depth: 83.7 ± 0.1 mm; volume: about 100 cm 3.

6. scraper plate material: Brass

7. Optional balance: weighing 500g, accurate to 0.1 g

8. Configuration: the stand: 1 set; Funnel: 1; cup; brass (Φ31mm, 25ml) 1 只;; overflow trays stainless steel 1; brush 1; manual; warranty card; certificate.





Bulk density analyzer angle of repose tester powder metallurgy densitometer tap density tester plastic particles densitometer powder tap density meter Determination of apparent density measuring apparent density Apparent density test Apparent density tester ceramic density battery tap density powder tap density meter resistivity conductive carbon black powder true density meter tap density gauge powder metallurgy powder rheometer Density Tester true proportion of powder tester











Bulk density analyzer angle of repose tester powder metallurgy densitometer tap density tester plastic particles densitometer powder tap density meter Determination of apparent density measuring apparent density Apparent density test Apparent density tester ceramic density battery tap density powder tap density meter resistivity conductive carbon black powder true density meter tap density gauge powder metallurgy powder rheometer Density Tester true proportion of powder tester