Proppant bulk density tester, powder density meter bulk density tester

Proppant bulk density tester, powder density meter bulk density tester
 

Product description:

Powder density meter bulk density tester tap density analyzer angle of repose angle of repose tester powder flow tester tester versatility powder flowability tester powder flowability tester aluminum fluoride fluidity powder flowability tester powder body powder flowability tester paint flow measurement









Powder density meter bulk density tester tap density analyzer angle of repose angle of repose tester powder flow tester tester versatility powder flowability tester powder flowability tester aluminum fluoride fluidity powder flowability tester powder body powder flowability tester paint flow measurement









Proppant bulk density tester, ceramic bulk density tester, QSY125 proppant tester, Q / SY 124 bulk density tester, bulk density ceramic, quartz sand bulk density tester, ceramic bulk density tester, ceramic sand bulk density


FT-109A bulk density proppant bulk density tester ceramic ceramic sand bulk density tester

First, meet the standards: According to the newest standard API RP60. Q / SY 124-2007 and SY / T 5108-2006 proppant fracturing performance indicators and test methods recommended and QSY 125-2007 fracturing proppant tabulation and evaluation of performance test method of making

Bulk density: bulk volume of proppant mass units called proppant volume density; unit bulk volume of the ceramic mass called bulk density ceramic and containing ceramic itself, opening pores and the average density of stomata closed three parts of the unit. It is g / mL

Volume V. bulk density tester drum container equal to about 100ml.

Second, the test method: 1. to ensure adequate mixing of the proppant sample, the riffle shrink into a representative sample of about 200g proppant poured into the funnel BD tripod, opened the rubber ball, proppant samples to be falling. After full barrels containers with a ruler along the top of the container once gelling.

2. Use a balance, said the quality of the proppant samples obtained within the container W. accurate to 0.001g.

3. Calculate the proppant bulk density: BD (g / cc) = mass / 100

Third, the technical parameters required:

1. Mouth barrel container chassis instrument table always high on the funnel 304.8mm ; Proppant whereabouts point play an instrument from the mesa 215.9mm ;

2. Funnel high 76.2mm ; Funnel high 12.7mm ; Barrel-high 76.2mm ; Instruments mesa width = 30.48mm .

Block rubber ball diameter = 30.48mm ;

3. Diameter stainless steel stent frame = 4.8mm ; Barrel volume diameter 38.1mm ;

4. The outer diameter of the funnel top = 139.7mm ; The inner diameter of the top of the funnel = 114.3mm ;

5. Funnel and measuring cup of stainless steel .

6. Configuration: Brush; ruler; Level; Manual; certification; warranty card;