obd2repair BMW ICOM A B C ICOM ISID ISIS diagnosis program for BMW

obd2repair BMW ICOM A B C ICOM ISID ISIS diagnosis program for BMW

Product description:

ICOM is obd2 repair OBD complete diagnostic system for bmw. ICOM A B C support programming, diagnosing and coding. ICOM ISID ISIS have full system replace B-M-W GT1, OPS, OPPS diagnostic tool.


B-M-W ICOM B-M-W ISIS ISID A+B+C without software, just hardware

Please NOTE this ICOM does not contain software, if you want buy ICOM with software, please check

ICOM with software

ICOM A B C description

  • ICOM A: Vehicles with OBD capability (Connect to ISIS/ SSS/ ISID with LAN or WAN)

  • ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system

  • ICOM C: Older model series with diagnosis socket in engine compartment (OBD2)

Optional Information:

HS Code: 8708 Parts and Accessories of the Motor Vehicles BMW Group ISIS Next Generation Tools 3G 2008

3G Components:

Integrated Service Information Server (I S I S) two servers (one backup) + ISTA

Integrated Service Information Display (ISID) portable tablet device

Integrated Communication Optical Module (ICOM) set of vehicle interface devices-all models

Integrated Measurement Interface Box (IMIB) measurement interface device

Integrated Service Access Point (ISAP) for wireless connection to ISIS

1. ICOM A description (16PIN interface)

ICOMA is the basic component. In physical terms, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integration to the repair shop network interfaces required. Computer through an efficient core, which is responsible for testing as a protocol converter device and vehicle control unit and connected to the data exchange between the measurement techniques required for signal processing. Supply voltage by KL30 by vehicle interface. ICOM A requirement of the electrical operation of a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function

2. ICOM B function (MOST interface)

ICOM B is the external ICOM A MOST (Multimedia Transmission System) interface. It is through the USB cable to connect with ICOM A. Supply voltage provided by ICOM A through USB. Only when the lowest of the ICOM A supply voltage of 8V, when, ICOM B would only be ready to run the electrical side of the vehicle through a standard ICOM B MOST interface.

3. ICOM C function (20PIN interface)

ICOM C is an intelligent interface converters that allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connections. Supply voltage from the vehicle side of the circular socket by KL30 provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to ICOM A power supply. Only when the vehicle?s battery voltage exceeds the minimum limit in order to ensure stability of the two devices interact.

4. ICOM A Extension Cable (16PIN Interface extension cord)

ICOM A was due to different models and different models and their own weight, a direct connection OBD-II diagnostic blocks are susceptible to loss and poor contact, the use of extension cords, connecting reliable, easier to use.

ICOM / ISIS / ISID B-M-W new detector (off-line programming support) B-M-W ICOM / ISIS (including computers, a complete set of configuration, support for off-line programming, diagnostics) .