[Auto Safety] - [Car Safety] - [Other Car Safety]

Engraving machine for authentic Raiser stepper motor drive

Engraving machine for authentic Raiser stepper motor drive
  • Engraving machine for authentic Raiser stepper motor drive
Product code: 25276200001
Unit price: 30000-32000 CNY
Reference price: 4357.68-4648.19 USD
Minimum order:
Other info: Per piece
Visit my shop
Max length: 30000 (mm) Max Thickness: 100 (mm)
Custom processing: no Max Width: 20000 (mm)
Types of: Engraving Machine rated power: 0.25 (kw)
model: MA860H Brand: Raiser
Product Type: brand new Dimensions: 48 * 95 * 117 (mm)
Forms of work: Automatic
  • MA860H

    product description
    MA860H drive, the main driver of 86110-type two-phase hybrid stepping motor micro-step breakdown of the number of 16 species, the maximum number of steps of 51200Pulse / rev;. Its operating peak current range of 2.4A-7.2A, output current total of eight files and current resolution of about 0.6A;. with automatic half current, overvoltage, overcurrent protection functions of the drive is AC-DC power supply, the proposed operating voltage range of 48VAC-80VAC, voltage does not exceed 90VAC, not less than 24VAC.

    The main application areas
    Suitable for a variety of large-scale automation equipment, such as: engraving machine, cutting machine, packaging machinery, electronic processing equipment, automatic assembly equipment, users expect little noise, high-speed device applications particularly good effect.

    Drive Function

    Drive function

    Instructions

    Number of micro-step breakdown of the set

    By the SW5-SW8 four DIP switches to set the number of micro-step drive, a total of 16 stalls its micro-step user setting micro-step, stop the drive operation. Specific micro-step number set, please drive surface layout instructions.

    Output current setting

    The SW1-SW3 three DIP switches to set the driver output current, the output current total of eight file specific output current, please drive surface layout instructions.

    Automatic half flow function

    Users can set the drive through SW4 automatic half flow function .off represent half the quiescent current is set to dynamic current, on represents the static current and dynamic current is the same general uses SW4 should be set to off, so that the motor and drive heating reduction, increased reliability. After the burst stop for about 0.4 seconds current is automatically reduced to about half (60% of the actual value), heat theoretically reduced to 36%.

    Signal Interface

    PUL + and PUL- control pulse signal positive terminal and a negative terminal; DIR + and DIR- for the direction signal positive terminal and a negative terminal; ENA + and ENA- to the positive terminal and a negative terminal signal.

    Motor Interface

    Positive and negative terminals A + and A- then stepping motors A phase winding;. B + and B- positive and negative terminals connected to the stepper motor phase winding B when A, B or exchange the two-phase winding, can reverse the motor direction.

    Power Interface

    AC power supply, the operating voltage range is recommended 18-80VAC, electrical power is greater than 300W, voltage does not exceed 90VAC and not less than 24VAC.

    Lights

    Drive has two LEDs which red, green and green light for power indicator, when the drive is powered up the green light; after the red fault indicator, when an overvoltage, overcurrent fault, fault lights lit the fault is cleared. the red light is off. When the drive fails, only to re-power and re-enable to clear the fault.

    Installation Notes

    Drive external dimensions: 151 * 97 * 48mm, installation pitch of 143mm both horizontal and vertical installation, vertical installation is recommended to install, should fit snugly against the metal cabinet to facilitate cooling...

    Preferences
    MA860H drive using eight DIP switches set subdivision precision, dynamic current and semi-flow / full flow described in detail as follows:

    Working current setting

    Output Peak Current

    Output reference current

    SW1

    SW2

    SW3

    2.00A

    2.40A

    on

    on

    on

    2.57A

    3.08A

    off

    on

    on

    3.14A

    3.77A

    on

    off

    on

    3.71A

    4.45A

    off

    off

    on

    4.28A

    5.14A

    on

    on

    off

    4.86A

    5.83A

    off

    on

    off

    5.43A

    6.52A

    on

    off

    off

    6.00A

    7.20A

    off

    off

    off

    Micro-step set

    Number of steps / rev

    SW5

    SW6

    SW7

    SW8

    400

    on

    on

    on

    on

    800

    off

    on

    on

    on

    1600

    on

    off

    on

    on

    3200

    off

    off

    on

    on

    6400

    on

    on

    off

    on

    12800

    off

    on

    off

    on

    25600

    on

    off

    off

    on

    51200

    off

    off

    off

    on

    1000

    on

    on

    on

    off

    2000

    off

    on

    on

    off

    4000

    on

    off

    on

    off

    5000

    off

    off

    on

    off

    8000

    on

    on

    off

    off

    10000

    off

    on

    off

    off

    20000

    on

    off

    off

    off

    40000

    off

    off

    off

    off

    Mounting dimensions