The main function:
1. 3D CNC operating system
X-axis travel 500mm, Y axis travel 1000mm, Z axis travel 500mm
Can be of various flat surfaces, automatic repair the hole, to be completed more than? 65mm internal cladding
2. Scope of Application
Available for large defects and small variety of imported and domestic machinery parts for quick automatic repair;
Can be of various materials, the hardness of the substrate defect repair;
Can Cladding variety of metals and tungsten carbide, ceramic powder other non-metallic materials;
The substrate surface can be acid, alkali, high temperature, wear-resistant modification.
3. cladding speed
Cladding speed can reach Φ3.2mm * (0-12) HZ / S.
4 cladding thickness
Disposable tinkering metal powder thickness can reach 0.1-1.0mm, disposable tinkering sheet metal thickness can reach 0.1-0.6mm, and can be repeated to increase the thickness of the cast.
5 can be equipped 0-200m fiber, convenient for long-distance non-contact metal restorations.
6. The powder feeder
Automatic synchronization dusting powder feeding and automatic mode is optional.
1. penetration welding
No filler between 3mm double metal plate welding, welding layer metallurgically bonded, the back pad without any welding marks. Suited to the requirements of the back weld layer finish, coated and backside solder layer welded flammable items. Welding after the substrate is not deformation.
2. Since welding
Below 10mm butt welding between the metal plate from melting, metallurgical bonding, solder continuous, uniform weld clean, no splash.
3. welding filler
You can use metal powder, metal wire, metal sheet as a welding material for various metal welding, no deformation after soldering the substrate.
The thin-walled welded
Above may 0.1mm metal band, a variety of welding metal plates, after welding matrix deformation.
The following metal plate can be 10mm automatic cutting, cutting mouth uniform, clean, better than the line speed cutting.
By scanning spot metal surface, the metal surface to be completed by the quenching process. Quenching surface uniformity, hardening position accurately. No. 45 after the steel after laser surface hardening hardness HRC50-55.
YAG laser cladding renderings