Fully automatic viscometer FDT-0471
Automatic viscometer for kinematic viscosity by GB/ T265-88, GB/ T11137-89, ISO3104, ASTMD445, ASTM D446 under the requirements of the determination of liquid petroleum products (Newton liquid) , in units of m2 / s, usually in actual use mm2 / s. The dynamic viscosity is the kinematic viscosity of the liquid measured at a constant temperature and the same temperature of the liquid density of the plot. Automatic viscometer measurement of transparent and opaque liquids, including crude oil, light and heavy fuel oils, lubricants, additives, waste oil kinematic viscosity.
1, large-screen LCD, while the determination of kinematic viscosity values of the two samples.
2, fully automated testing process, thermostat, detection, calculation, viscosity tube cleaning, drying fully automated.
3, innovative infrared detection technology, automatic identification of liquid through the time.
4, allows the user to set the parameters change, the instrument automatically calculates the test results and the actual error value, if there-tolerance automatically retest until you meet the requirements.
5, the instrument has automatic diagnostic fault program, and easy maintenance.
6, the test results through a computer printer output report single coefficient, measuring kinematic viscosity average error value
7, can be based on user needs can be configured refrigeration equipment
Temperature range: room temperature -100 ℃
2, temperature accuracy: ± 0.01 ℃
3, the maximum timing time: 999.9 seconds
4, the detection unit: Group 2
5, power supply AC: 220V ± 10V, 50Hz ± 5% of
Ambient temperature: 0 to 40 ℃
7, relative humidity: ≤ 85% RH
8, maximum power: 2000W
Constant temperature of the liquid in the tank with 10 # transformer oil