(X-ray) sulfur content analyzer FDR-3201
Petroleum products sulfur content analyzer (X-ray spectrometry) is designed and manufactured in accordance with the requirements stipulated by the People's Republic of standard GB/ T11140, GB/ T17040, ASTM D4294, the instrument is suitable for the determination of the trace sulfur content of petroleum products. Because it uses physical methods of analysis, analysis speed without the need for complex sample preparation, high precision, human error is small, low labor intensity, no pollution, it has been widely used in the international arena and to basically replace other measured sulfur methods of analysis.
1 all-Chinese operating system, man-machine interface of the friendly exchanges.
2, the detection of a short time, to automatically test results within 30 seconds; Automatic C / H ratio correction, suitable for a variety of samples;
3, large-screen LCD, automatic print measurement data;
4, using the X-ray tube excitation, the instrument can be used for a long, regardless of source attenuation;
5, using physical methods of analysis, the analysis does not contact, does not destroy the sample, without the chemical reagents;
6, the instrument uses the integrated design, easy maintenance;
1, the scope of analysis: S scope of analysis can be adjusted through the calibration work curve method selected.
2, the scope of analysis width: S max-S min ≤ 9.999%; such as oil: S: 0.001 ~~ 9.999%.
Inherent error analysis accuracy: Oil: meet the national standard GB / T 17040 also comply with the relevant requirements of the American National Standard ASTM D4294.
4, system analysis time: 1 to 999 seconds, the recommended value is 60 seconds.
5, the detection limit: 10ppm
6, use conditions: Ambient temperature: 5 to +40 ° C, relative humidity: ≤ 85% (30 ° C) Power supply: 220V ± 20V, 50Hz.
7, the whole power consumption: (;150W.