High-temperature lubricant foam characteristics tester Applied standards: ASTM D6082 SH/ T0722
High-temperature lubricant foam characteristics tester for testing oil at 150 ℃ foam properties. The sample was heated to 49 ℃, temperature was cooled to room temperature and after 30min, and the specimen is transferred to a predetermined measuring cylinder and heated to 150 ℃, diffusion of the metal head through the dry air and ventilation 5min, aeration was stopped immediately before measuring the static amount of foam, foam volume and movement stopped after a predetermined time ventilation static foam volume, foam vanishing time and the total percentage increase in volume.
1, The instrument for the split, including the Heating method bath and precise flowmeters.
2, high temperature borosilicate glass cylinder, Φ300 * 450mm, meet the standard requirements;
3, environmentally friendly oil bath heated to reduce soot on the human body injury, efficient thermal insulation;
4, stainless steel heater;
5, the air filter with glass wool;
6, thermostat and PID microprocessor control, digital display of temperature, Precision 0.1 ℃, Pt100 RTD temperature probes;
1, Temperature control: PID digitalTemperature controller imported
2, Temperature control precision: ± 0.1 ℃
3, Heating method : oil bath heated
4, Total Power: 2.5KW5, work units: 2
6, Flow control: Precision Flowmeter
7 Power supply: AC220V/ 50Hz8, Temperature range: 150 ± 0.1 ℃