Mechanical impurities of petroleum products tester FDR-2001
Mechanical impurities of petroleum products and additives analyzer is designed in accordance with the national standards GB/ T511 petroleum products and additives Determination of mechanical impurities (gravimetric method) provides requirements applicable to the determination of the various types of light petroleum products, heavy oil, lubricants and additives mechanical impurities content.
1, take the warm-up, and test integrated structure design, reasonable structure, beautiful appearance, reliable quality.
2, circuit temperature control table to control electric heating plate temperature, so that the temperature of the heating plate thermostat controlled, in order to meet the test needs.
3, using a solid-state regulator regulating insulation funnel input voltage, thereby controlling the size of the heating power to achieve the purpose of heating required insulation funnel.
4, filtration devices connected by a vacuum pump and filter flask fully protected difficult to filter the sample measurement.
1 Power supply: AC 220V ± 10%, 50Hz.
2, water bath heating power: 1000W.
3, the water bath temperature control range: room temperature ~ 90 ℃ adjustable.
4, the water bath temperature display: LED digital display.
5, the water bath temperature control accuracy: ± 1 ℃.
6, funnel Temperature range: room temperature ~ 90 ℃ adjustable.
7, funnel Temperature Display: LED digital display.
8, the funnel temperature control accuracy: ± 2 ℃.
Dimensions: control box 390 (L) x 260 (width) * 590 (H) ;
Water bath 90 (L) x 290 (width) x 370 (H) .
10, the ambient temperature: ≤ 35 ℃.
11, relative humidity: ≤ 85%.
12 Total power consumption: not more than 1200W.