The engine coolant Simulation FDY-0801 corrosion meter
Engine cooling fluid simulation using the the corrosion analyzer applicable standards: SH/ T0088-91 this instrument to use: the sample under certain temperature and flow conditions in the reservoir, water pump, radiator and rubber tube closed system Cycle 1064h, its corrosion resistance can be provided by the reservoir from the engine cooling system of the typical metal used in the test piece weight loss and visual inspection of each member within a state of the surface determined. The change in performance of the sample in the test cycle on a regular basis for analysis of a sample taken from the system to determine. The instrument is suitable for the engine coolant concentrate and engine coolant.
1, the engine cooling fluid simulation using the corrosion analyzer using explosion-proof motor and fitted with over-temperature protection, storage cover above equipped with safety valve, to ensure the security instrument run.
, Engine coolant analog the corrosion analyzer with piston displacement of 1.6 ~ 5.0L auto water pump and cooling water tank, countertops with stainless steel fasteners made of stainless steel screws, easy to disassemble never rust.
3, engine coolant simulation using corrosion analyzer using imported digital temperature controller, the PID tracking temperature control and high precision.
4, engine coolant analog corrosion meter turbine flowmeter sensor measurement accuracy and intuitive.
5, engine coolant simulations using corrosion analyzer using intelligent digital timer, accurate timing, the actual running time is displayed after the midway stop.
1, the liquid flow rate: 1.3 ~ 1.6L / s
2, control temperature: 88 ℃ ± 3 ℃
3, running time: 1064h
4 heating power: 2.6kw
5, motor power: 2.2KW
6, the pressure directions: 80 ~ 103Kpa
7, Total Power: 4.8kw
8, the work of the power supply: AC380V ± 10% 50HZ
9, Weight: 180Kg