Futaba S3003 servos | Marine steering / robot servo / vehicle steering gear | mechanical arm 38G

Futaba S3003 servos | Marine steering / robot servo / vehicle steering gear | mechanical arm 38G
 

Product description:

! S3003 servo durable shell, three kilograms of torque receivers compatible with the brand fast, large torque, high accuracy, complete accessories (including photographs did not shoot accessories: screws, set screws, damping pads). Suitable Cars, ship model, robots, mechanical arm, etc.

Technical Parameters:

Futaba S3003 standard servo for use on cars, boats and other remote control model.

Alternative Futaba of S138, S148, S22, S38 and S12.
parameter:
Speed: 0.23 seconds / 60 degrees (4.8V)
0.19 seconds / 60 degrees (6V)
Torque: 3.2kg / cm (4.8V)
4.1kg / cm (6V)
Volume: 44L X 20W X 40H
Weight: 37.2g

Rotation angle: 180 degrees (left and right 90 °

Precautions:
1. Please specify the interfaces you need to buy
2. Use this product according to the drawings install servos shown in Annex Special Note: for vibration engine powered airplanes, car model, and ship models, you must use rubber shock pad.
3. Select the appropriate model for your Special Note: Torque over-loaded will cause body damage.
4. Keep the servo clean and away from erosion contaminated dust, corrosive gas and humid air.