|Input parameters: ||- || Output parameters: ||- |
| Custom processing: || It is || model: ||220V |
| Battery Type: || Lithium Ion Battery || outerID: ||S110001 |
| Brand: || neutral || Charging current: ||- (A) |
| certified product: ||- || Dimensions: || - (Mm) |
The charger through a variety of certification, the output voltage 4.2V, standard current 0.5A, limiting current 0.6A, with a perfect over-current, short circuit protection, without immediately cut off the power supply after full, will not overcharge. So that the power margin Very full, even under extreme conditions without failure.
Output voltage: 4.2V
Output Current: 500 mA (3.5 hole plug)
Input voltage: 110V-240V
Output two lines, output green light is normal standby mode, when charging is red, when charging the battery voltage reaches about 4.16V red light turns green, then the charger is not entirely stop charging, but a small current continues to trickle charge, the maximum ended voltage of 4.21V. The charger with full protection, so ruffle wiring short circuit will not damage the charger.
State Indicates: green light for standby (trickle charging state is 4.16V)
Flashing green light for over-voltage 4.21V
Flashing red battery fault or short circuit
Two chargers and batteries as a direct series is 7.2V (also balance charge) charger it! Input is 100V-240V, output 4.2V500mah, for capacity 500mah-5000mah lithium polymer battery!
Charger with short circuit, overcurrent, overvoltage, reverse polarity short circuit protection.