The gear bearings, shaft components, valve, cylinder and other mechanical parts hardening | hardening machine, and supporting the use of high-frequency induction heating for quenching HONGCHUANG YFL-S

The gear bearings, shaft components, valve, cylinder and other mechanical parts hardening | hardening machine, and supporting the use of high-frequency induction heating for quenching HONGCHUANG YFL-S
 

Product description:

Scope:

Quenching machine with high, medium frequency induction heating equipment together to achieve induction hardening process, commonly used in gears, bearings, shaft components, valve, cylinder and all kinds of mechanical parts of the quenching and other heat treatment.

Features:

1. Using industrial digital control system, advanced performance, debugging easy to use, to the greatest extent to meet the needs of complex workpieces quenching;

2. hardening can be achieved by: continuous scan hardening, while hardening, piecewise continuous scanning Hardening (segmented by program settings, without limit switch, the same below), while sub-quenching;

3. The machine electrical control system reserved for quenching and cold water control interface, can quench engineering and cooling process is controlled according to process requirements;

4. Low operating costs, drive a small motor power operation of the workpiece;

5. Using profiles fuselage structure, low cost, light weight, economical and practical;

6. easy maintenance, low failure rate, no leakage;

7. A high degree of automation, high production efficiency;

8. The pilot valve using linear bearings, high precision, low friction, long life;

9. counterweight means through sprockets, chain balance weight.




Technical Parameters:

Model: YFL-SK-1000/1500

Maximum hardening degree (mm): 1000/1500

Maximum workpiece clamping length (mm): 1000/1500

Maximum turning diameter (mm): ≤ Φ500

Workpiece moving speed (mm / s): 2-60

Rotational speed (r / min): 40-150

Top moving speed (mm / min): 480

Workpiece weight: ≤80 / ≤120

Input voltage (v): two-phase 380

Total motor power (kw): 1.1 / 1.5

Dimensions (L * W * H): 1200 * 580 * 2300/1500 * 800 * 3200