Cape Lida | DW89CNC-TSR / TDR automatic monolayer film / double die bending machine

Cape Lida | DW89CNC-TSR / TDR automatic monolayer film / double die bending machine
 

Product description:

1. DW89CNC-TSR automatic single molding equipment used CNC bending machine control, feeding, corner two-axis servo motor and servo drive control drive, hydraulic elbow (elbow can be changed according to customer needs servo hydraulic pipe) .
DW89CNC-TDR automatic double bending machine molding equipment using CNC control, feeding, corner, elbow-axis servo motor and servo drive control drive, hydraulic and down about retooling.
2. You can set the manual, semi-automatic, fully automatic operation.
3. The automatic bending, automatic feeding, automatic tilting angle and can be controlled manually bend forming.
4. Operating panel with touch screen, menu input / operation screen display text in Chinese, other languages ​​as an alternative.
5. Bend data can be pipe X, Y, Z three-dimensional coordinate values ​​entered directly and automatically converted into Y, B, C processing or direct input Y, B, C actual processing value.
6. Data editing is complete with a key lock feature off.
7. With power and memory function, automatic computer memory location features.
8. bend test can be used to manually jog operation decomposition, observation interference point, easy to modify the action.
9. Each bend can be set to feed, back bent, with movable gatling triaxial or different move, to avoid interference point and at least eight ways to choose the sequence of motion.
10. The position can be set to be expected, the safety position, position wheel mode interference, guided mode interference position, etc., with procedures and mechanical limit shutdown protection.
11. piece counting function.
12. At the same zero-axis capabilities to reduce processing time and increase productivity.
13. failure, automatically detect error or machine malfunction detail malfunction of shortening repair work on the screen.
14. The manual can automatically detect an error indication, displays all unusual messages and instructions disposal in order to avoid human error and damage to the machine.
15. The single elbow piece of information can be stored individually.
16. The controller uses PLC electric control template computer, the maximum memory capacity of not less than 200 store program instructions.
17. All signal lines to be shielded from each other to avoid signal interference affect the program action.


Project Parameters

unit

DW89CNC-TSR

DW89CNC-TDR

The maximum bending capacity
iron tube
Stainless steel tube


Diameter * wall thickness
Diameter * wall thickness


Φ89*2
Φ89*1.8


Φ89*2
Φ89*1.8

Maximum bending radius

mm

350

350

The maximum effective distance of mandrel

mm

3000

3000

Feeding (Y)
The operating speed of the corner (B)
Bend (C)

mm / s

250-500

250-500

Degrees / sec

25-200

25-200

Degrees / sec

35

35

Bending angle

degree

0-185

0-185

Rotation angle

degree

360

360

Feeding (Y)
Mechanical precision angle (B)
Bend (C)
The upper and lower die change
About retooling

mm

±0.10

±0.10

degree

±0.10

±0.10

degree

±0.15

±0.15

degree

no

±0.10

degree

no

±0.10

Feeding servo motor

Kw

1.5

1.5

Gatling servomotor

Kw

1

1