Maximum bending diameter
Tube / non-ferrous metal
Pipe / stainless steel pipe
RHS / metal
| Maximum bending radius|| Mm||300|
| The maximum effective distance of mandrel|| Mm||3000|
| The maximum bending angle|| Degree||185|
| Use the controller|| IPC Industrial PC (WINDOWS System) |
| Bending speed|| Deg / sec||50|
| Angular velocity|| Deg / sec||25-200|
| Feeding speed|| Mm / sec||250-500|
| Feeding accuracy|| Mm||±0.10|
| Gatling Accuracy|| Degree||±0.10|
| Bending precision|| Degree||±0.15|
| Angle servo motor power|| Kw||1|
| Feeding servo motor power|| Kw||1.5|
| Data input|
1, the coordinate values (X, Y, Z)
2, the operating values (Y, B, C)
| Hydraulic system control|| Solenoid valve|
| Weight|| Kg||3800|
1, the standard display text: Chinese display.
2, the maximum memory capacity of 2 million program elbow groups of up to 30 programmable bending. (Expandable)
3, direct input bend machining parameters, the machine can be run automatically when a single step, you can pause, so that the bending process is manual intervention special fittings, can be restored automatically. Also has a pause function, with automatic and manual functions, a After running cycle next cycle starts with a switch, stop using the emergency stop button when needed.
4, work program and elbow unlimited program memory storage time, not long-term use due to power failure or loss caused by the program.
5, automatic processing machines during the same time, the controller still available for entering or editing program.
6, with XYZ coordinate values turn YBC processing value conversion function, easy operator use.
7, pipe program can be set in each processing step 0-9 a total of ten-speed movement of each axis alone to work for different things flexibility, improve work efficiency. Another external speed dial feature needs to be reduced or increased at any time according to the working speed.
8. When the input parameters can be determined automatically operated every bend of triaxial (feeding, Gatling, back bending) with dynamic set to faster bending speed.
9. with tools such as computer screens, trigonometric calculations, curved arc length calculation function, easy to use.
10, after having pulled automatic feeding and feeding function for switching back and forth in order to cater for different tube processing requirements.
11, with a processing capacity and processing time counting function.
12, using the absolute origin system reboot after the daily morning or rest, no complicated procedures to find the origin of each axis can immediately enter the work standby.
13, the screen simultaneously display the status of each operating axis position and bending angle of the change machine.
14, the control program with automatic detection of errors and countermeasures of the text display, the machine malfunction or illogical operation of all messages displayed directly on the screen, with instructions to repair ways to prevent human error and machine damage relatively lower maintenance difficulty. alarming information recording the automatic detection of Jieke automatically stored for future service reference.
15, with automatic or manual mode setting function according to different nature of the work, setting a number of different operating modes if no mandrel, auxiliary push different state, improve production efficiency.
16, with a number of the delay parameter value can make the most appropriate action for each axis of time difference is set to meet the changing needs of a variety of bending.
17, with the buttons and circuit input / output board of the automatic detection function, can easily find out the possible location of the fault.
18, with a slow retreat of the core functions, according to the program set feedthrough tube is retracted within the time, you can avoid a fixed position inside the tube mandrel protrusion phenomenon caused by the appearance of the pipe to enhance the appearance quality fittings.
19, with active standards pedal start switch, with emergency stop button. Separate independent controller (station) with fan air conditioning. Has forced independent freezer, prolong the life of the hydraulic system.
20, the machine includes a manual pump lubrication system, to protect the machine transmission parts, increase machine life.
21, the machine is controlled by a closed loop control.
22, has a flanged tube processing functions.