- Condition: New
- Brand: SANTAK / Hills
- Model: MT1000S delay 1 hour
Product Name: Shenzhen Hills SANTAK MT1000S-Pro 1000VA 600W delay 1 hour a set
Configuration list: Hills MT1000S host 1, 12V38AH battery 2, 12V38AH battery 2 pack battery box 1
Warranty: Host Genius, three years free warranty, battery replacement for three years
Mainframe size: 430 * 84 * 220mm Battery cabinet size: 435 * 210 * 270mm
This baby is heavier, freight for the logistics price, customers need to mention. For door-to-door, please contact customer service, thank you!
Hills / SANTAK uninterruptible power supply power and time configuration table
Red Coloured words click the link To correspond commodity As well as after power outages Delay time (According to the shops from time to time discount promotions, the specific price may fluctuate)
| Note: If the above information is not clear any place, please consult customer service, thank you! -─ ─ ─ ─ ─ ─ |
1) UPS use of the environment should pay attention to good ventilation, conducive to heat, and keep the environment clean.
2) Do not carry emotional load, such as Dianchao Ji, fluorescent, air conditioning, etc., so as to avoid damage.
3) UPS output load control in about 60% for the best, the highest reliability.
4) UPS with light (such as 1000VA UPS with 100VA load) may cause the battery depth of discharge, will reduce the battery life, should be avoided.
5) the appropriate discharge, contribute to the activation of the battery, such as long-term non-stop electricity, every three months should be cut off the mains with UPS with a load discharge time, this can extend the battery life.
6) for most small UPS, work and then open the UPS, boot to avoid the boot start, get off work should be shut down UPS; UPS for the network room, because most of the network is 24 hours of work, so UPS must also run around the clock.
7) UPS discharge should be promptly charged to avoid the battery due to excessive self-discharge and damage.