UPS uninterruptible power supply SANTAK Hills K500-Pro 300W single computer 20 minutes |

UPS uninterruptible power supply SANTAK Hills K500-Pro 300W single computer 20 minutes |

Product description:

Product parameters:

  • Condition: New
  • Brand: SANTAK / Hills
  • Model: K500

Product Name: Shenzhen Hills SANTAK K500-Pro 500VA 300W delay 10-15 minutes

Configuration list: Hills K500 UPS power supply 1 built-in high-quality Panasonic battery 12V 7AH a

Warranty: Genius, three-year free warranty, battery three-year warranty

SANTAK / SANTAK uninterruptible power supply power and time configuration table

Red Coloured words click the link To the corresponding commodity As well as the power needed Delay time (According to the shop from time to time discount promotions, specific prices may fluctuate)

Note: If any of the above information is not clear, please consult customer service, thank you! ──────


1) The use of the UPS environment should pay attention to good ventilation, which will help heat, and keep the environment clean.
2) Do not bring inductive loads, such as Dianchao Ji, fluorescent, air conditioning, so as to avoid damage.
3) UPS output load control at about 60% for the best, the highest reliability.
4) UPS with a light load (such as 1000VA of the UPS with 100VA load) may cause the battery depth of discharge, will reduce the battery life, should be avoided.
5) appropriate discharge, contribute to the activation of the battery, such as the long-term non-stop electricity, every three months should be cut off the city with a load with a discharge, so you can extend the battery life.
6) For most small UPS, work to re-open the UPS, boot to avoid starting with the load, get off work should be shut down UPS; for the network room UPS, as most of the network is 24 hours, so UPS must also run around the clock.
7) UPS discharge should be promptly charged, to avoid damage due to excessive self-discharge battery.