Sound Console MFX8\2

Sound Console MFX8\2
 

Product description:



Main technical characteristics:
• Built-in Lexicon 24bit effects
• Precision GB30 mic preamp
• Provide for a truly professional + 48V phantom power for condenser microphones
• Two sub-group buses
• Stereo main output
• Mixer input channel specification: 8/12/20 Road
• After two auxiliary outputs can be switched to pre-fader or post-fader
• FX Send
• Built-in universal power supply in the world
• Optional rack mounting accessories
• Microphone input (Mic Input)
A gold-plated XLR (female) connector for receiving balanced or unbalanced connections microphone signal.
127dB equivalent input noise (EIN) of the GB30 mic preamp has the lowest noise, clear and bright sound and excellent signal overload characteristics.
• line input (Line Input)
A balanced connection 1/4 Jack sockets, connectors balanced or balanced output of an electronic musical instrument, such as a keyboard.
• Insert (In sert) port
For the insertion of an additional compressor or EQ or other signal processing devices. If desired, also be used for multi-track tape recorder.
• Gain (Gain)
Each input channel has a gain control knob input signal gain adjustment range is + 5 ~ + 60dB (Line input has a -20dB attenuator). Preamplifier circuit design makes linear gain control over the entire gain range of more smooth.
• Equalizer section
Equilibrium is divided into three sections, where HF is shelving, provide 15dB attenuation or promotion in more than 12kHz. In bands in 150Hz-3.5kHz sweep, and the selected frequency to provide 15dB attenuation or promotion. Lower than 80Hz The signal can be controlled by LF equalization, providing 15dB attenuation or promotion.
• Auxiliary output section
Two auxiliary outputs can send independent monitor mixes in live performances. In the main control section, each auxiliary bus has its own independent master level control and AFL switch, can be switched pre-fader or post-fader.
• FX Send
Used to send signals to the built-in 24-bit Lexicon effects processing module.
• Pan, Mute, PFL and Routing
Pan knob position determines the position of each channel signal sent to the appropriate stereo image. Mute switch with LED (Mute) to completely cut off the signal .PFL key is used to separate the monitor signal. Each mono signal available to the main mix output by Mix / Grp switch routing (Route), or a subgroup (Sub Groups) output.
• faders and peak level LED indicators (Faders and Metering)
Each channel has a smooth stroke 60mm fader, LED peak level indicator, warning signal level exceeds + 17dBu.
Stereo input channel section
• input connector (Input Connectors)
Stereo signal, to the best features of other professional audio equipment to transmit signals via a 1/4 jack socket balanced input connection.
• Equalizer EQ
There are three fixed shelving EQ controls .HF 8kHz high frequency adjustment range is ± 15dB; MF MF adjustment range 720Hz to ± 15dB; LF low frequency adjustment range 60Hz to ± 15dB.
• Auxiliary output section (Auxiliary Section)
Stereo input channel has two AUX auxiliary sends. Send a front main control section selects fader or post-fader.
• FX Send
Used to send signals to the built-in 24-bit Lexicon effects processing module.
• balance, mute, PFL and Routing
Balance control is to adjust the amount of signal sent to the left and right channels bus .Mute same method of operation and the single-channel input mute and PFL assembly, for closing or independent monitor stereo channels. When you press the PFL button, push child before the signal is sent to the headphones, control room sound system to the level of output and stereo input channels via Mix / Grp switch routing (Route) to the main mix output, or subgroups (Sub Groups) output

• faders and peak level LED indicators (Faders and Metering)
Each stereo channel has a smooth travel 60mm faders, LED peak level indicator, warning signal level exceeds + 17dBu.



The main control section
• effects (Effects)
A control knob to select the effect program, three control knobs to adjust the effect parameters, two knobs control the transmission to the AUX1 and AUX2 effect level. PFL, Mute, Store (user effect settings are stored) and beats key Tap Tempo (for a time / speed-based effects such as delay), foot switch input for controlling the FX switch.
• + 48V phantom power (+ 48V Hantom Power)
One button to control all professional + 48V phantom power when activating phantom power, LED lights.
• 2 sound track recording inputs and outputs (2-Track Inputs and Outputs)
2 track recorder and recording send recording input is to use the interface unbalanced RCA phono connections. Playback mix control of the 2 track routed directly to the main mix output.
• Monitor switch (Monitor Switchine)
Monitor output can be reproduced in the second sound track recording, mixing and switching between grouping.
• monitor output (Monitor Outputs)
Headphones and Room Monitor output with independent level control, use a 1/4 jack socket.
• mix outputs (Mix Output)
With a set of balanced XLR connector connected, the left and right channels provide the main output mix.
• Stereo return
1/4 jack socket to connect an external processor, and has a level control.
• subgroup (Sub Groups)
Control of all subgroup outputs via LR subgroup faders, 1/4 Jack socket connector subgroup outputs.
• fader and level meter (Faders and Metering)
LR fader grouping a set of control subgroup output levels. The main sound mix output fader controlled by a single stroke of 60mm. With 2 rows of 10-segment 3-color LED peak level meter to monitor the left and right channel mixer output. peak level meter typically follows the currently selected part of the display monitor. Therefore, if you press the PFL button, the peak level meter switches to monitor PFL, PFL activated LED lights.

• Frequency Response: Mic / Line input to any output terminal + / -1.5dB, 20Hz-20kHz........
• Total harmonic distortion + noise: Microphone sensitivity -30dB, mix output + 14dBu ....... (0.02%@1kHz
• Noise: Equivalent noise Mic EIN (maximum gain) ......- 127dB (formerly impedance 150Ω)
AUX, MIX and master control at 0dB (fader at the lower end) .......... (- 82dBu
• Crosstalk between channels (1kHz): Channel mute ........................) 90dB
Fader closed (reference designator +10) .................) 90dB
AUX Send mouth shut .....................) 82dB
• EQ (mono input): HF ....................... 12kHz + / -15dB
MF (sweep) ............... 150Hz-3.5kHz, + / -15dB
LF....................... 80Hz + / -15dB
Q (MF) .......................... 1.5
• EQ (Stereo Input): HF 12kHz + / -15dB.......................
MF....................... 720Hz + / -15dB
LF....................... 80Hz + / -15dB
Q (MF) .......................... 0.8
• power consumption: AC power is less than 40W.......................
• Working conditions:...................... Temperature range 5 ℃ ~ + 40 ℃
• Input / Output Level: Microphone input maximum + 15dBu......................
Line input...................... Maximum + 30dBu
Stereo input..................... Maximum + 30dBu
Mix 20dBu maximum output ......................
Headphone output (150Ω) .................... 300mW
• Input / output impedance: Microphone input 2kΩ.........................
Line input........................ 10kΩ
Stereo input.................... 65kΩ, 35kΩ
Output impedance..................... 150Ω, 75Ω
• Dimensions (W x H x D):............... MFX8 / 2 383mm x 94mm x 405mm
• Weight:......................... MFX8 / 2 4.0kg