Main technical characteristics:
Built Lescan (Lexicon) 24bit effects √
Precision GB30 mic preamp √
To provide real professional + 48V phantom power for condenser microphones √
Two group busses √
√ stereo mix output
Mixer input channel specification 12/20
All AUX send switch to pre-fader or post-fader 2
FX Send 1
Built-in universal power supply √
Optional rack mount kit may √
MFX has more input channels, additional AUX input and two output bus group. If you need greater flexibility of use, should be used MFX mixer.
MFX mixer is a live sound system equipment products, including fixed installation systems, mobile PA systems, church and music playback system. It is a compact device ideal.
12 Road and 20 Road MFX-channel input mixer has been authorized loaded with 32 reverb, chorus and other effects processing 24bit effect. With three alternative MFX AUX auxiliary internal FX send send for more I prefer to use external effects tuner.
MFX mixer includes two stereo input channels, dual sound track recording interface and dual sound track recording playback output port. In this way, play CD, MP3 or other music program source easy to intermission.
To increase the use of functions, each module MFX Mixer has two sub-grouping outputs and a stereo mix output, allowing grouping channel control easier to manage. MFX 2 auxiliary buses also can be used as effect send or provide foldback mixes .
The famous GB30 mic preamp and for condenser microphones to provide + 48V phantom power is professional sound quality assurance system. Built-in universal power supply replaced with an external power supply.
MFX single channel input, stereo input and a main control section
Single-channel input component
Mic (Mic Input)
A XLR (female) connector for balanced or unbalanced connections microphone signal.-127dB equivalent input noise (EIN) of the GB30 mic preamp has the lowest noise, clear and bright sound and excellent signal overload characteristics.
Line input (Line Input)
A balanced connection 1/4 "jack socket, connect balanced or unbalanced output of electronic musical instruments, such as keyboards.
Insert (Insert) port
For inserting additional compression or EQ and other signal processors, if desired, also be used for multi-track tape recorder.
Each input channel has a gain control knob input signal gain adjustment range is + 5 ~ + 60dB (Line input has a 20dB attenuator)
EQ EQ frequency characteristics
The HF frequency characteristics into a balanced, MF MF and LF low frequency high-frequency control three-stage HF frequencies above 12KHz, providing 15dB of boost or attenuation (gain adjustment);. MF IF can sweep control 150Hz-3.5KHz range bandpass the center frequency of the filter, providing 15dB of boost or attenuation; band-pass filter Q value 1.5; LF low frequency control frequencies below 80Hz or less, provide or enhance ± 15dB attenuation.
Auxiliary input (Auxiliaty)
When live live mixer, 2 (MFX) AUX auxiliary input to send separate mixes or sends for external effects. In the master assembly, each AUX bus has its own master output level adjustment, AFL ( post fader) switch, and all can be switched to pre-fader or post-fader (AUX3 is in post-fader)
It sends a signal to the built-in 24bit lexical effects.
Pan, Muting, PFL and Routing
Pan used to control each channel signal to the corresponding position of the stereo image. When the mute switch (Mute) completely cut off the channel's signal, Mute indicator lights. PFL key is used to separate signals either single-channel output signal routing (Route) to the main mix output, you can also go to the subgroup (Sub Groups) output via the Mix / Grp switch routes.
Faders and peak level LED indicators (Faders and Metering) 68
Each channel has a smooth stroke 60mm fader (attenuator), LED peak level indicator, indicating the signal level does not exceed + 17dBu.
Stereo input channel assembly
Input Connector (Input Connector)
Stereo signal, in order to convey the best features of other professional audio equipment stereo signal via 1/4 "jack socket balanced input connection.
EQ EQ frequency characteristics
There are three fixed slope characteristic of the filter control knob .HF 8KHz control high frequency in the range of ± 15dB; MF MF at 720Hz control range is ± 15dB; LF low frequency in the range of 60Hz control ± 15dB.
AUX auxiliary transmission section (Auxiliary Section)
There are two stereo input channels (MFX) AUX auxiliary sends. Press the main control unit selected for the mix or for effects processing, you can switch to pre-fader or post-fader send.
Signal is sent to the built-in 24bit lexical effects
Bal, Muting, PFL and Ruting
Balance balance control to regulate the amount of signal sent to the left and right channels .Mute bus operation keys mute and PFL single-channel input assembly, for closing or only listen to the stereo channels. Press FPFL key, fader signal to the headphones, control room sound system output and output level meter indication, stereo input channels can be routed to the stand mixer output, but also to the subgroup outputs via the Mix / Grp (mix / group) switch routes.
? Faders and peak level LED indicators (Faders and Metering)
Each stereo channel has a smooth stroke 60mm fader (attenuator) and a peak level LED lights to indicate signal level does not exceed + 17dBu.
The main control module
A control knob to select the effect program, three control knobs to adjust the effect parameters, two knobs control the transmission to the AUX1 and AUX2 effect level. PFL, Mute, Store (user effect settings are stored) and a light beat key Tap Tempo (time / speed basic effects such as), foot switch on / switch FX.
+ 48V phantom power (+ 48V Hantom Power)
One button to control all professional + 48V phantom power when activating phantom power, a LED lights.
2 sound track recording inputs and outputs (2-Track Inputs and Outputs)
2 track recorder recording audio input and output using RCA connectors unbalanced connections. Playback mix control of the 2 track routed directly to the main mix.
Switch (Monitor Switchine)
Output can be reproduced in the second sound track recording, mixing and switching between grouping.
Output (Monitor Outputs)
Headphone output and rooms with independent level control, use a 1/4 'jack socket.
Mix outputs (Mix Output)
With a balanced XLR connector connected, the left and right channels provide the main output mix.
External processor connected with level control 1/4 'jack socket.
Subgroup (Sub Groups)
Control of all subgroup outputs via LR subgroup faders, 1/4 'jack socket connector subgroup outputs.
Fader and level meter (Fader and Metering)
LR Group faders control subgroup output level. And all of the main sound mix fader processed by a single stroke of 60mm. With 2 rows of 10-segment 3-color LED peak level meter to monitor the left and right channel mixer output. Peak level meter display usually limits the current selection. Therefore, if you press the PFL button, the peak level meter will be switched to output indication, PFL LED lights will be activated.
Dimensions: W * H * D (MM) 69
MFX12: 482 * 94 * 405
MFX20: 688 * 94 * 405
Weight: MFX12: 6.7kg
MFX: 9.3 kg