ULTRAPROBE ® 2000 ultrasonic full-function detecting instrument
High-tech, integrated, leak detection on site quick and easy, high-performance, multi-purpose, applied throughout the entire industrial area
ULTRAPROBE2000 ultrasonic feature detectors in order to use for design purposes, no more than 15 minutes to complete the test. ULTRAPROBE2000 for quick and accurate diagnosis, will significantly reduce unplanned downtime and planned work stoppage loss time, ULTRAPROBE2000 will be your most practical diagnostic instruments. Rapid and accurate diagnosis of minimize unplanned downtime and shorter plan work stoppage loss of time. Efficient maintenance testing virtually all devices, only one person with one instrument to complete testing, UP2000 efficient repair and maintenance on a regular basis.
ULTRAPROBE data acquisition using three methods: through the auditory channel (industry-specific detection can configure a headset or handset), through the unique design of the bimodal model instruments; Graphic recorder connected through a secondary vibration data collection, spectrum analyzers, digital storage and standard audio recorder (optional).
ULTRAPROBE2000 almost any failures in the operation of the test equipment.
* Frequency tuning: users pick up problem sound while reducing interference of background noise.
* Instrument mode: select the real-time response adjustments and average response to adjust this feature allows accurate adjustment for leakage detection and analysis of mechanical failure.
ULTRAPROBE2000 ultrasonic heterodyne in the audible range provides accurate sound reproduction.
ULTRAPROBE2000 only sensitive to ultrasonic frequencies, devices will not respond to most of the factories are often of low frequency noise, can be effectively used in extremely loud environments.
• When a leakage in the system, regardless of internal than external pressure (pressure), or external than internal pressure (vacuum), the gas will leak through pores in turbulence. When the leak is small, turbulence around the leak no-load ultrasonic frequencies greater than 20KHz.
L when the rotating machinery due to excessive lubrication or improper lubrication, overload due to wear, this must be accompanied by no-load ultrasound.
L arc, leakage and corona discharge is the precursor to failure of electrical equipment, the harbinger of failure also can be accompanied by no-load ultrasound.
Ultrasonic multi-functional detectors using an ultrasonic receiver probe, detection load ultrasonic signals and adults can hear sound and reflected on the indicator.
Bearing checked and lubrication failure monitoring
Ultrasonic multi-functional detectors to monitor precursors of bearing and lubrication failure.
Mechanical fault diagnosis
Ultrasonic multi-functional detectors can routinely check on the operation of various types of equipment, such as Vortex air pump, valve leakage and damage to gear failure, and can be used for detection and analysis of reciprocating compression valve.
Ultrasonic multi-functional testing instrument will be issued by the ultrasonic trap run into the human ear can hear voices. The operator through headphones and meter readings can understand the trap of working conditions.
Pressure and vacuum leak detection
When a gas (such as air, oxygen, helium, and so on) through the drain holes, forming a turbulent, high frequency sound waves. Detector receives ultrasonic signals from headphones, are reflected on the meter and probe with fixed-band frequency select mode, can greatly reduce the noise disturbance.
Leaking zoom in liquid applications
Micro-leaks (1x10-3 ~1x10-6std/CC) have a little turbulence, LLA leak detection method (leak zoom in fluid) can detect a trace amount of the leaks.
Arcing and corona discharge, will emit ultrasonic, ultrasonic multi-functional detectors can be used to quickly measure the discharge location. Such as switch boxes, transformers, electric gate, bus, insulators and other electrical equipment testing.
Heat exchangers, boilers and condensers
Ultrasonic multi-functional detectors can be used to detect leaks and pressure leak. Ultrasonic high frequency-wave characteristics help operating detected leaks in a noisy environment the point of failure.
Ultrasonic sound test
Ultrasonic sound test is a non-invasive ultrasonic test method. Ultrasonic signal generator for this test method in the test of internal (or port). have a strong ultrasonic pulse signal generator full containers through small leaks, if any. External ultrasonic multi-functional detectors can detect sound waves penetrate to determine location. This sound test can detect a wide range of equipment, including containers, Yoko Iizuka, piping, heat exchangers, seal, door, auto and aircraft
Contact type detection:
Bearings, gears, line congestion, steam valves, valve, compressor, motor, pipes, fluid direction underground leaks.
Vacuum leak, welding, electrical transformer station, heat exchangers, seal, pump, tank, air brakes, bedding materials, pressure leaks (various), arc (including Corona), caulking (air infiltration), wind noise, and junction boxes
ULTRAPROBE ® 2000 complete plants
ULTRAPROBE complete plants contain pistol-type ultrasonic multi-functional detectors, contact and non-contact detection module detection module, rubber poly sound, ultrasonic signal generator, battery recharger and sound isolating earphones, operating disc, aluminum carrying case.
' The Trisonic scanning module can be found in the air such as: pressure and vacuum leaks and electrical discharges in ultrasonic.
' The rubber focusing probes reduce the scanning module receives band and noise blocking air.
' Stethoscope (contact) the ultrasonic probes for monitoring internal, such as bearings, steam filter and valve.
' Deluxe industrial noise-reducing headphones.
' Video training CD.
' Probe extended tools to expose the stethoscope to 31 inches (76.2 cm) away.
' Selector switch with amplitude ultrasonic signal generator, used to tune test methods.
' Pistol ultrasonic multi-functional detectors and ultrasonic signal generator battery charger.
' Aluminum carrying case.
ULTRAPROBE ® 2000 technical specifications
Structure: hand gun type host, made with anodized aluminum and ABS plastic.
Frequency response: detecting ultrasonic frequencies between 20kHz-40kHz-100kHz, sustainable regulation, frequency coverage range of 100Hz to 3kHz audio.
Scanning module (non-contact): durable TRISONIC plug-in, constitutes a Multiprobe ultrasonic phased array antenna module. To prevent RF interference.
A stethoscope module (contact): Insert probe with a RF shielding insulation, length 4 1/2 (11.4 cm) angle probe, cover an even surface contact probe tip is removable (use with stethoscope module extensions).
Rubber focusing probe (flexible): conical design, install scanning module collected stray ultrasonic signals also applies when the apparatus at the time of maximum sensitivity stethoscope module installed to shield interference of ultrasonic signals in the air.
Stethoscope module extension Kit: 3 pieces, segmented metal probe connections can increase the contact range up to 20 (50.8 km. cm) and 31 (76.2 cm).
Ultrasonic signal generator: patent for ultrasonic signal generator.
Superior noise isolation headphones: Wired stereo headphones, impedance of 16ohms. 23dB noise attenuation, meets or exceeds ANSI codes and OSHA standards.
Display: ejection-type instrument, load measuring 0-100 related to the linear calibration range, 1% wide range of instrument accuracy, low battery LED display to keep the hosts internal power supply.
Battery: rechargeable Ni-CD batteries, rechargeable power supply: AC110/220V.
Features: frequency tuning knob, 20-100kHz scale, adjustable fixed frequency.
Dual-mode switch: used for logarithmic and linear scaling adjustment. As a graphic recorder output of the auxiliary mode: 0-50 mV (optional).
Sensitivity control: 10-digital adjusting knob.
Size: a full set of instruments in an aluminum box:15x22x7(38.1x55.9x17.8cm). pistol master: 2 pounds (0.9 kilograms), complete weight: 14 lb (6.4 kg).
Sensitivity: detection diameter is 0.005 (0.127 mm) pressure to 5 PSI (0.34 bar/0.33Kg) leakage point, distance can be up to 50 feet (15.24 m).
* The critical value: 1 x 10-²-1 x 10-³ STD. cc/sec. freon.
ULTRAPROBE 2000 instruments meet or exceed ASTM E1002-93 leak detection requirements.
United States Government NSN:6635-01-156-3927 and the FSCM (CAGE) Code:59202
Contains the following patents: 4416145, EP015115, 502674183
• Intrinsic safety.
• Class 1, Division I, Groups A, B, C & D
• More than ASTM-
• Ultrasonic leak detection standard
• CE certification
• EX certification
• American Buerau of Shipping (ABS) TYPE APPROVAL 95-NY-166-X
• Det Norske Veritas (DNV)