Rose riveting nut | Nuts rose burst

Rose riveting nut | Nuts rose burst
 

Product description:


Rose riveting nut is a fastener used in sheet metal, sheet metal, chassis, cabinets, rose riveting nut shape, there are two: one was outside the hexagon, with NZ NZS representation; the other is cylindrical, with Z ZS represents. pressed into a circular plate is inside, no inner teeth. Generally a good start in the pre-sheet plate hole, will rise into the plate hole rivet nut with a fixture will no inner portion of the tooth from the inside out up so that the sheet close up rivet nuts and riveting. rose riveting nut is generally not hardened, so as to ensure its toughness, thermal and rise time, both the element clench up, but not so the element split up. So production when you choose a good material is very important. make up riveting riveting nut tight on the plate, so as to form on the sheet at the effective fixed internal thread.
Rose riveting nut from the material into cutting steel rivet nut Z NZ rose, stainless steel rose riveting ZSNZS type two nut; rose riveting nut into a cylindrical shape from Z ZS; hexagonal nuts rose riveting NZ NZS of four, They are used in different environments.
Rose riveting nut no specific national standards, the early manufacturers from the United States, gradually formed after today's industry standard was introduced domestic domestic producers, mostly from Guangdong, Shenzhen and other regions.

Rose riveting nut Advantages:
Round up riveting nuts and hex nuts rose riveting, widely used in sheet metal, control box and power mosaics wall cabinets and other products of its unique structure, assembly, simply rose riveting nut into a metal plate hole to 'up riveting' work to achieve, has the following advantages:
1, the use of special toughness of steel, with a special jig up from the inside out, making up riveting nut tightly tensioner hole in the plate, component assembly firm, not falling, the assembly process is simple.
2, in order to further ensure no slip nut up riveting, many manufacturers have adopted measures to increase flower teeth;
3, the raw materials used cutting cutting iron or stainless steel;
Rose riveting nut Applications Guide:
1, choose nuts column, it must be used according to the thickness of the plate, does size range, low-carbon steel plate hardness must be less than 70RB, stainless steel plate hardness must be less than 80RB.
2, cutting iron surface treatment, stainless steel holding primaries, users may need to press table model specifications orders, it can also be customized according to particular needs.
3, plate hole size must be according to the size of 0- + 0.075mm tolerance for processing, the proposed punching.
4, the installation must be 'rose riveting' work to achieve, can not cut the impact of typing.
5, made of stainless steel tail number with 'S' marked.
Rose riveting nut Code Explanation:
Z-M3-1.2 round iron materials rose riveting nut thread code applicable thickness 1.2
ZS-M4-2 Round stainless steel rose riveting nut thread code applicable thickness 2
NZ - M3 - 1.5 hexagon iron materials rose riveting nut thread code applicable thickness 1.5
NZS - M8 - 5 hexagonal stainless steel rose riveting nut thread code applicable thickness 5

Rose riveting nut Flare-In nut
(product description)
Rose riveting nut, its head is serrated, riveted by the job, it is embedded in a metal plate, can also be embedded in the insulating circuit board as the head to the solder, it is more safe and reliable.
Rose riveting riveting nut has a tapered hole round and hexagonal rivet vias are two, round rivet nut tapered bore material is carbon steel, zinc plated (white), hexagonal nut rivet through the hole material is brass, surface-plated tin.
The selection of nuts, depending on the thickness of the material must, look-up table to determine the number that corresponds to the selected tooth thickness A dimension whose plate hardness must be less than the hardness of the nut. Installation must be 'riveted' work to achieve, must not impact typing.

(Product Features)
• installation and assembly provides a simple method;
• High torsional torque and high load conveying capacity;
• easy to assemble, simply riveted; specifications series, can meet a variety of design requirements;
• specifications series, can meet a variety of design requirements.

(product material)
• Stainless steel • Copper •

(Technical Parameters)
Metric rose riveting nut Technical Data Sheet


Thread Size
Thread Size
* Pitch
model
Material Type
A
±0.1
Minimum sheet thickness
Sheet Thickness

Min.
Sheet Hole Size
Hole Size

+0.08
diameter
C

Max.
The outer diameter
E

±0.25
thickness
T

±0.25
Steel Stainless Steel
M3*0.5 Z ZS 1.21.52 1.21.52 5 4.98 7 3
M4*0.7 Z ZS 1.21.52 1.21.52 6 5.98 8 4
M5*0.8 Z ZS 123 123 8 7.98 10 5
M6*1.0 Z ZS 123 123 9 8.98 11 6
M8*1.25 Z ZS 123 123 11 10.98 13 6

American rose riveting nut Technical Data Sheet


Thread Size
Thread Size
* Pitch
model
Material Type
A
±0.1
Minimum sheet thickness
Sheet Thickness

Min.
Sheet Hole Size
Hole Size

+0.08
diameter
C

Max.
The outer diameter
E

±0.25
thickness
T

±0.25
Steel Stainless Steel
.138-32 (#6-32) Z ZS .047/ . 059/ . 079 .047/ . 059/ . 079 .197 .196 .276 .118
.164-32 (#8-32) Z ZS .047/ . 059/ . 079 .047/ . 059/ . 079 .236 .235 .315 .157
.190-32 (#10-32) Z ZS .039/ . 079/ . 118 .039/ . 079/ . 118 .315 .314 .394 .197
.250-20 (1/4-20) Z ZS .039/ . 079/ . 118 .039/ . 079/ . 118 .354 .353 .433 .236
.313-18 (5/16-18) Z ZS .039/ . 079/ . 118 .039/ . 079/ . 118 .433 .432 .512 .236