SRT6200 Surface Roughness Tester

SRT6200 Surface Roughness Tester

Product description:

The characteristics of the instrument using computer technology, in line with the national standard GB / T 6062 and ISO, DIN, ANSI and JIS four criteria, can be widely applied to the production site, to measure surface roughness of various machined parts, measured according to the selected Conditions calculate the corresponding parameters, clearly shows all the measured parameters on the LCD monitor for measuring the surface roughness, the sensor on the measured surface of the workpiece, driven by the drive mechanism inside the instrument to do along the tested surface sensor Speed ​​Skating line sensor through the built sharp stylus feel measured surface roughness, when the measured surface roughness of the workpiece caused stylus displacement, the displacement amount sensor inductance coil inductance changes, resulting in a phase-sensitive rectifier generated at the output proportional to the measured surface roughness column analog signal, the signal after amplification and level conversion into the data acquisition system, the data will be collected DSP chip digital filtering and parameter calculation, measurement results are displayed on a liquid crystal display , and can communicate with the PC, data analysis and printing.

* Multi-parameter measurement: Ra Rz;.
* High-precision inductive sensors;
* RC.PC-RC.GAUSS.D-P four kinds of filtering methods;
* Built-in lithium ion rechargeable battery and charging control circuit, high capacity;
* Mechatronics design, small size, light weight, easy to use, built-in standard RS232 interface
It can communicate with a PC;
* With automatic shutdown.
This table has two shutdown mode: one for manual shutdown, another five minutes off the keyboard.
* Has metric conversion function.


Display: blue backlight, 4-digit display, 10mm LCD
Measurement parameters: Ra, Rz
Measuring range:
Ra: 0.05-10.00um / 1.000-400.0uinch
Rz: 0.020-100.0um / 0.780-4000uinch
Accuracy: less than ± 10%
Indication variability: not more than 6%
sensor :
Measuring principle: Inductive
Radius: 10μm
Material: Diamond
Force: 16mN (1.6gf)
Angle: 90 °
Longitudinal radius: 48mm
Maximum driving stroke: 17.5mm / 0.7inch
Sampling length l (optional): 0.25mm, 0.8mm.
Drive speed:
When the sampling length = 0.25mm when, Vt = 0.135mm / s
When the sampling length = 0.8mm, Vt = 0.5mm / s
When the sampling length = 2.5mm, Vt = 1mm / s
Returns Vt = 1mm /
0.001μm when the measured value (10μm time
When 0.01μm when 10μm≤ measured value (100μm
When the measured value ≥100μm 0.1μm
Evaluation Length: 1-5L optional
Power: Built-in lithium ion rechargeable battery 1.
working environment:
Temperature: 0 - 50 ℃
Humidity: (85% RH
Dimensions: 140 * 52 * 48mm
Weight: about 420g