MUT-600B digital ultrasonic flaw detector MUT600B is a fully digital portable ultrasonic flaw detector that can quickly and easily, without damage to accurately perform a variety of defects (cracks, inclusions, porosity, etc.) to detect, locate internal parts, assessment and diagnostics for both the laboratory, but also for engineering field testing. This instrument is widely used around the special prosecutor hospital, construction quality inspection stations, machinery manufacturing, iron and steel metallurgy, steel manufacturing, shipbuilding, oil and gas equipment manufacturing and other areas need to defect detection and quality control, it is also widely used in-service safety inspection and life assessment aerospace, railway transportation, and other areas of boiler and pressure vessel equipment characteristics: high quality, low price
Full Chinese display, master-slave menu, and the design of shortcut keys and digital jog knob, easy operation and advanced technology
Full digital true color LCD display, select the background color according to the environment and waveform color LCD brightness can be set freely
High-performance battery module for easy removal of the security, independence offline charging, high-capacity high-performance lithium-ion battery module make the instrument continuously extended to more than six hours; light small portable instrument, which can be gripped with one hand, durable, and guide the industry trend
The main technical parameters
Detection range: (0 ~ 6000) mm
Operating frequency: (0.5 ~ 10) MHz
Velocity range: (1000 ~ 15000) m / s
Dynamic Range: ≥32dB
Vertical linearity error: ≤3%
Level linearity error: ≤0.2%
Resolution power:) 33dB (5P14)
Sensitivity margin:) 60dB (deep 200mmФ2 flat bottom hole)
Digital inhibition: (0 to 80)%, does not affect the linearity and gain
Electrical noise level: ≤10%
Probe type: straight probe, Oblique probe, duals, penetration probe
Gates: into the wave gate, lost wave gate; single gate reading, double gate reading
Alarm: beep alarm, LED light alarm
Power supply: DC (DC) 9V; lithium battery for more than 8 hours of continuous work
Dimensions: 263 * 170 * 61 (mm)
Ambient temperature: (-10 ~ 50) ℃
Relative humidity: (20 ~ 95)% RH
Note: The above indicators are in the probe frequency of 2.5MHz, detection mode is the case of full-wave measured.
Pulse amplitude: low, medium and high-grade choice for a wide range of probe
Pulse width: fixed width, not adjustable.
Zero interface incident 0 ~ 6000mm (steel, longitudinal wave), can be adjusted continuously
Door position, door width, door height adjustable; B Gate selectable settings into the wave alarm or loss of wave alarm; inner gate beeps and LED lights (noisy noisy environment alarm LED lights are very effective) alarm on and off.
10 sets of testing parameters channel can be pre-adjusted parameters good combination of various types of probes and instruments, the freedom to set the industry standard testing; can store 1000 testing echo signals and parameters, memory, and read out via USB interface.
Real-time testing date, time, track record, and the record store.
USB2.0 high speed transmission interface communication
High-capacity lithium battery module, online charging and offline charging two charging methods to facilitate testing personnel.