Single hot-machine | high temperature ironing machine | ironing machine Sheets | Quilt ironing machine | tablecloth ironing machine

Single hot-machine | high temperature ironing machine | ironing machine Sheets | Quilt ironing machine | tablecloth ironing machine
 

Product description:

species: Ironing machine style: Steam formula
Brand: Tongyang model: 2.8 m single drum
Scope: Industrial Dimensions (L * W * H): 3800 (mm)
net weight: 1500 (Kg) voltage: 380 (V)
rated power: 0.75K (w) Product Type: brand new

Single-temperature hot flat machine ironing machine ironing machine quilt linen tablecloth ironing machine ironing machine.

1 Before ironing fabric, first clean the surface of the roller, the roller surface with a soft cloth and wipe the machine clean and ministries to ensure that the machine clean.

2 , Motor and control section must be insulated inspections of empty machine is functioning properly.

3 Check each hole is smooth, and inject the right amount of oil, adding an appropriate amount in the reducer in 20 or 40 No oil.

4 , Adjust the conveyor belt, to ensure that the tension is moderate, not be too tight or too loose.

5 , Steam heated ironing machine, you should first open the steam trap next to the shut-off valve, open the steam inlet valve later, the remaining water inside the drum to be emptied after turning off; then turn speed motor or drive controllers, slow rotating its knob, to 2 ~ 3m / min Low speed ironing machine, while the inlet valve is fully open, the heating roller, observe the pressure on the left side ironing machine located on the box represents the value until the steam pressure reaches 0.3MPa Above, before you start ironing work.

6 For electric type ironing machine, you should open the governor or drive controllers, slowly rotating its knob, to 2 ~ 3m / min Low speed ironing machine, and then turn on the heating roller heating button, and watch the thermometer located on the right side of the box showing the value of ironing machine on, wait until the temperature reaches 100 When ℃, before you start ironing work.

7 The fabric flat dehydrated processed on the conveyor belt, input ironing ironing area.

8 A fabric ironing case, obtain the appropriate speed-control knob can be normal ironing.

Contact: Cao Hau Wah (General Manager)

phone: ( 0 ) 13301430058 0523 - 86861688 86565738 (fax)