2.5-4 meters hydraulic shears

2.5-4 meters hydraulic shears
 

Product description:

Hydraulic shears is borrowed in motion on the blade and fixed lower blade, using reasonable blade clearance, shearing force is applied to various thicknesses of sheet metal, the sheet material separated by the desired size of the fracture.
2.5-4 meters hydraulic shears steel plate welded structure, hydraulic, accumulator return, easy to operate, reliable performance, beautiful appearance. Hydraulic shears borrowed in motion on the blade and fixed lower blade, using reasonable blade gap, for various thicknesses of sheet metal shear force is applied, the sheet material separated by the desired size of the fracture.
Electric shears mainly used for flat cutting irregular graphics, theoretically as long as the energy drawn with AUTOCAD graphics can be cut (radius less than twice the plasma kerf width graphics can not be cut).
Electric shears to use:
Shears may arise in the course of the following circumstances start cutting machine idle for several cycles, ensure that under normal circumstances, try cutting different thickness of sheet metal, from thin to thick. To ensure that users are familiar with cutting performance. Test Shear You must adjust to different blade clearance. If the corresponding blade gap adjustment, the impact of the durability of the blade when different thickness. shears open gauge switch in the shearing process, observe the oil pressure, shear 12mm plate pressure should be less than 20MPa. This remote regulator No9, the factory pressure settings 20-22MPa, users must comply with this requirement, shall not exceed a predetermined material cut surface to improve pressure, causing damage to the machine. sound balance operation. shears as murmur, you should stop and check. When cutting operating tank to raise the temperature (60 degrees over off the rest.