Foot Shears

Foot Shears
 

Product description:

Foot pedal shears tension spring means sliding fulcrum fixed to the operating force by two thirds, part of the machine with a pressing device, high cutting quality, and light weight, easy to move features. Wide Applies to: light industry, instrumentation, electronics, aviation, shipbuilding, metallurgy, stainless steel products, steel construction and decoration industries.
Foot shears features:
1. This machine is generally used in hardware, appliances, tile and sheet cutting material only suitable for cold metal sheet, cold cut.
2. Before use, make the machine to maintain a balance, regular oiling, keeping oil cup oil for lubrication, work together and lightweight.
3. Do not cut the electricity of human rational structure, cut automatic reset, foot lightweight and comfortable, with a gauge and tread bars cut folding device, cut quality: cut Qi, straight edges, no edges, achieve precision shear effect. convenient and economical and practical power-saving precision cut operation.
Shears safety rules:
1, before the operation to wear tight-fitting protective clothing, cuffs fastened jacket hem can not open, can not start the machine next to wear off clothes, or around the cloth on the body to prevent the machine crush injury must wear a helmet, braids should placed inside the cap, can not wear skirts, slippers.
2, the machine operator must be familiar with shears main structure, performance and use.
3, the machine is suitable for cutting a material thickness of the machine rated various steel, copper, aluminum and non-metallic sheet material, and must be no hard marks, welding slag, slag, weld material, does not allow super thickness .
4, this machine use:
a, according to the thickness of the material to be cut, adjusting the gap of the blade.
b. According to adjust the width of the material to be cut by mold or fixture.
C, before the machine operator to make 1--3 times air travel, before the implementation of cutting work properly later.
5, the use of the machine is not running properly if found, should immediately cut off the power down to check.
6, adjust the machine, you must cut off the power, moving parts, should pay attention to the safety of hand.
7, the machine should be kept lubricated ministries, operators should be filled with oil class once every six months by the mechanic of rolling bearing parts add oil again.